What does trouble code p0011 on an intake mean?

The camshaft (s) is (are) adjusted by the ECM through the use of an oil control valve (s) (OCV) also called variable valve timing control solenoid valves. When trouble code P0011 is set, it means that the intake camshaft in Bank 1 is more advanced than the ECM has told it to be. What Are The Symptoms Of Code P0011?

How much does it cost to diagnose p0011 GMC code?

The cost of diagnosing the P0011 GMC code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

What to do if your check engine light says p0011?

Check to see if there are any other codes along with P0011 and clear your Check Engine Light with FIXD. Check the engine oil level and condition. If it’s low, adjust to spec and test drive to see if the concern is resolved. If it’s dirty, change the oil and filter and test drive to see if the concern is resolved.

What to look for in a p0011 Chevy?

Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. What does this mean? The cost to diagnose the P0011 CHEVROLET code is 1.0 hour of labor.

What does DTC p0011 mean on a Hyundai?

The Engine Control Module ( ECM) accumulates this deviation for a certain period and sets DTC P0011 when the accumulated deviation is too high. The target camshaft position is predetermined value depending on engine speed and throttle angle in the ECM .

What causes low engine oil in a p0011 Kia?

P0011 KIA Possible Causes Low or Dirty Engine Oil Faulty Valve Timing Control (VTC) Valve Timing Control (VTC) harness is open or shorted circuit. Valve Timing Control (VTC) circuit poor electrical connector Incorrect timing Engine mechanical problems Damaged Engine Control Module (ECM) What does this mean? First diagnose P0011 KIA code

Is the p0010 error code the same as p0020?

Just so you know, the P0010 error code can also go together with different codes, including the P0020, P0011, P0012, P0021, P0022, even more. 1 What is this Code All About? 4.1 1. Let’s start! 4.2 2. Visual Check What is this Code All About? The work of the variable valve timing (VVT) system is to increase engine performance and fuel economy.

How much does it cost to diagnose the p0011 Infiniti code?

The cost of diagnosing the P0011 INFINITI code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour. When is the P0011 INFINITI code detected?

What does the Diagnostic Code p0010 mean on a crankshaft?

This code is actually a generic one. When the diagnostic code P0010 is returned, it shows that a potential problem was discovered with the ECM picking up a gap between the mechanical parts of the camshaft (bank 1) and the crankshaft. This type of error is usually detected at a higher speed.

What is the ECM for DTC p0011?

•DTC P0011 runs continuously when the above conditions are met. The ECM detects the difference between the desired camshaft position angle and the actual camshaft position angle is greater than 8 degrees for 20 s. •DTC P0011 is a Type B DTC. •The CMP actuator is commanded to the park position. DTC P0011 is a Type B DTC.

What causes DTC p0011 on a Vortec 6000?

DTC P0011 is a Type B DTC. •Inspect the engine for any recent engine mechanical repairs. An incorrectly installed camshaft, camshaft actuator, or timing chain can cause this DTC to set. •The engine oil condition has a major impact on the camshaft actuator system.

What should I do if I find a p0011 set?

If the initial P0011 sets and other codes are present then erase all codes and do five camshaft drive cycles and then re-investigate which codes come back. If any of these codes are present disregard and erase. If they come back it is electrical wiring or connection failure.

What does the p0011 DTC on an Impala mean?

That consists of a few different components but the P0011 DTC specifically refers to the camshaft (cam) timing. In this case, if the cam timing is above a set limit (over-advanced), the engine light will be illluminated and the code will be set. The “A” camshaft is either the intake, left, or front camshaft.

What does p0011 stand for in VVT?

The way VVT works is that the ECM/PCM closely monitors the cam/crank timing and uses an oil control solenoid to manipulate the relationship between the cam gear (s) and the camshaft (s) according to predetermined algorithms. Again, the P0011 DTC stands for “A” Camshaft Position Timing Over Advanced or System Performance Bank 1.

How to fix p0011 Nissan intake valve timing bank?

How do I fix code P0011 NISSAN Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. P0011 NISSAN Tech Notes

How long does it take to diagnose Nissan p0011 code?

An error occurred while retrieving sharing information. Please try again later. The cost of diagnosing the P0011 NISSAN code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type.

What is a cam timing on Opel p0011?

That consists of a few different components but the P0011 Opel DTC specifically definition:the camshaft (cam) timing. In this case, if the cam timing is above a set limit (over-advanced), the engine light will be illluminated and the code will be set. The “A” camshaft is either the intake, left, or front camshaft.

What are the possible causes of a BMW p0011?

P0011 BMW Possible Causes 1 Variable Camshaft Timing Circuit open or shorted 2 Variable Camshaft Timing Circuit poor electrical connection 3 Failed Camshaft Actuator 4 Engine mechanical problems

What does code p0011 cam timing mean?

Fault code p0011 means “A” camshaft position timing- over advanced (bank 1). This code pertains only to vehicles with variable valve timing. Within these systems, an actuator rotates the engine camshaft to advance or retard camshaft timing.

What is a p0011 code?

P0011 is a diagnostic trouble code (DTC) for “Camshaft Position A – Timing Over-Advanced or System Performance (Bank 1)”.

What does a camshaft sensor control in a vehicle?

The camshaft position sensor gathers information about the vehicle’s camshaft speed and sends it to the vehicle’s engine control module (ECM). The ECM uses this data to determine the timing of the ignition, as well as the timing of the fuel injection that the engine requires.

What is an exhaust cam actuator solenoid?

An exhaust cam actuator solenoid is the apparatus that takes a computer signal and mechanically invokes the actuator to shift the position of the exhaust cam.

What causes an Opel p0011 DTC trouble code?

A P0011 Opel DTC trouble code may be caused by one or more of the following: Incorrect camshaft timing Wiring problems (harness/wiring) in intake timing control valve control solenoid system Continuous oil flow to VCT piston chamber Failed timing valve control solenoid (stuck open)

What does Infiniti p0011 intake valve timing control?

That consists of a few different components but the P0011 Infiniti DTC specifically definition:the camshaft (cam) timing. In this case, if the cam timing is above a set limit (over-advanced), the engine light will be illluminated and the code will be set.

What does code p0011 Infiniti DTC stand for?

A code P0011 Infiniti definition:the VVT (variable valve timing) or VCT (variable camshaft timing) components and the car’s PCM (powertrain control module, also called an ECM). That consists of a few different components but the P0011 Infiniti DTC specifically definition:the camshaft (cam) timing.

What is the OBDII code for an intake valve?

OBDII Code List P0011 NISSAN P0011 NISSAN – Intake Valve Timing Control Performance Bank 1 Repair Importance Level: 3/3 Repair Difficulty Level: 3/3 Comments | Add Comment P0011 NISSAN Possible Causes Low or Dirty Engine Oil Faulty Intake Valve Timing Control Solenoid Valve

What does code p0021 mean on the ECM?

What Does Code P0021 Mean? The variable valve timing system increases fuel economy and engine performance by regulating when the intake and exhaust valves are opened and closed. The camshaft (s) is (are) adjusted by the ECM through the use of an oil control valve (s) (OCV) also called variable valve timing control solenoid valves.

What does the p0021 Nissan engine code mean?

Since the Intake valve timing control solenoid valve uses oil flow to control timing, dirty oil can cause the valve to stuck open or close. Before replacing the valve, change engine oil and filter and reset engine code. What does this mean? The cost of diagnosing the P0021 NISSAN code is 1.0 hour of labor.

What does DTC p0011 and p0021 stand for?

These four DTCs could be an electrically failed OCV but they would most likely be accompanied by a P0010 or P0020 code. For the P0011 and P0021 codes to appear indicates that the OCV solenoid is mechanically open at all times and allowing engine oil to move the intake camshaft (s) without PCM intervention.

What does the a stand for in a p0021 engine?

The “A” camshaft is either the intake, left, or front camshaft. A P0021 engine code is basically the same as a P0011 code, except this is for Bank 2, not Bank 1.

What to do if Nissan p0021 code comes back?

If the code comes back you can remove the Intake valve timing control solenoid and clean it with brake cleaner. The cost to diagnose the P0021 NISSAN code is 1.0 hour of labor.

What are the symptoms of a p0021 DTC?

A P0021 engine code is basically the same as a P0011 code, except this is for Bank 2, not Bank 1. Most likely a P0021 DTC will result in one of the following: hard starting, poor idle, and/or stalling. There are potentially other symptoms as well.

How does the intake valve timing control solenoid valve work?

The intake valve timing control solenoid valve changes the oil amount and direction of flow through intake valve timing control unit or stops oil flow. The longer pulse width advances valve angle. The shorter pulse width retards valve angle.

When do I get a p0010 error on bank 1?

When the Engine Control Module tries to adjust the timing of the Bank 1 intake camshaft with one of these oil control valves, and it alerts an electrical issue with the solenoid windings in the valve or the circuit that goes into the valve, the code P0010 error is triggered.

What does p0010 mean on an engine code?

If you are like most of my clients who find it difficult to understand some of these terms, the engine code P0010 means that there is most likely to be an issue with the timing of your car’s mechanical variable valve. This code is actually a generic one.

What is the p0010 code on a cel?

Driving home today, I got the dreaded CEL. Went to AutoZone and got the P0010 code – Intake Camshaft Position (CMP) Actuator Solenoid Control Circuit. I haven’t had any major problems with this car.. yet.

What does it mean when trouble code p0011 is set?

When trouble code P0011 is set, it means that the intake camshaft in Bank 1 is more advanced than the ECM has told it to be. What Are The Symptoms Of Code P0011?

What does p0011 mean on a camshaft Pos?

It’s a generic error code produced by an over-advanced condition which typically occurs during the retarding or advancing of the camshaft timing. Most people will notice some issues with the engine prior to the P0011 code being generated. It may become erratic, stall regularly, or may struggle to start on occasion.

How much does it cost to repair a Subaru p0011 code?

Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cost of diagnosing the P0011 SUBARU code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

Navigation