How to change parking brake on Mazda 6?
Apply protective tape along the edge of the body to pr 1. Remove the hub bolt using the SSTs. Note If the dust cover interferes with the wheel hub bolt and the wheel hub bolt cannot be removed, tap the part shown in the figure with a chisel lightly and bend the processing point back to the steering knuckle side.
Why does my Mazda 6 have an operation sound?
An operation sound occurs when applying or releasing the electric parking brake, however, this does not indicate a malfunction. If the electric parking brake is not used for long periods, an automatic inspection of the system is performed while the vehicle is parked. An operation sound can be heard, however, this does not indicate a problem.
What to do if your parking brake won’t release?
Step 1: Put on your safety glasses and grab your flashlight Locate the parking brake cable in the cab of the vehicle. Step 2: Check to see if the cable is corroded or full of rust. Look for the cable pin to be corroded to the parking brake pedal. Step 4: Look at the connections.
When does the electric parking brake switch turn on?
When the switch is released, the electric parking brake is released and the beep stops. If the electric parking brake is applied with the ignition switched off or in ACC, the brake system warning light in the instrument cluster and the indicator light in the switch may turn on for 15 seconds.
Apply protective tape along the edge of the body to pr 1. Remove the hub bolt using the SSTs. Note If the dust cover interferes with the wheel hub bolt and the wheel hub bolt cannot be removed, tap the part shown in the figure with a chisel lightly and bend the processing point back to the steering knuckle side.
An operation sound occurs when applying or releasing the electric parking brake, however, this does not indicate a malfunction. If the electric parking brake is not used for long periods, an automatic inspection of the system is performed while the vehicle is parked. An operation sound can be heard, however, this does not indicate a problem.
What happens when you put the EPB on a Mazda?
When the EPB is applied, the EPB switch indicator light turns on. If the vehicle is driven with the parking brake applied, the brake parts may generate heat and the brake system may not operate, leading to an accident. Before driving, release the EPB and verify that the EPB indicator light is turned off.
What should I do if my Mazda brake light turns on?
If you do not intend to drive immediately, shift the change lever (manual transaxle) to the neutral position, or shift the selector lever (automatic transaxle) to the P or N position. The warning light turns on when the system has a malfunction.