Where is the Mazda 2 fuel filter?
In any case, the fuel filter of your Mazda 2 must be present on the fuel system. So it will be located between the tank and the carburetor. You will be able to spot it because it has the shape of a cylinder with 2 rods and it is connected by 2 hoses.
How big is the gas tank on a Mazda RX8?
When driving in a 60-65 mph zone the fuel economy will quickly rise to 19-20mpg. The Mazda Rx8 gas tank is a 60 liter tank or 15.9 gallons and the fuel light illuminates when there are 10 liters or 2.6 gallons of fuel remaining. To calculate your fuel consumption each time you fill the tank.
How can i Improve my Mazda RX8’s fuel economy?
With the Cobb software you can modify your engine maps to increase power, fuel economy and change many engine settings. Loading the default stage 1 map you can expect to increase your Mazda Rx8 fuel economy by about 5% or 1mpg. The best way to improve you MPG is also the cheapest quite simply by changing the way you drive.
When to reset the ECU on an RX-8?
This is the same walkthrough as featured in our other technical article “RX-8 Stalls when Battery is Disconnected” We have placed it here as its also the best way to reset the ECU anyway. This is a brief guide to a possible solution for those that have problems with the car idling after your battery has been disconnected and the ECU reset.
How often should I Have my RX-8 serviced?
Servicing Tips – RX-8. DO NOT FORGET THE IMPORTANCE OF THE INTERIM SERVICING Interim Servicing should be carried out at least once a year between each yearly service, Ideally 3000-6000 miles or 3-6 month intervals as mentioned above.
When driving in a 60-65 mph zone the fuel economy will quickly rise to 19-20mpg. The Mazda Rx8 gas tank is a 60 liter tank or 15.9 gallons and the fuel light illuminates when there are 10 liters or 2.6 gallons of fuel remaining. To calculate your fuel consumption each time you fill the tank.
With the Cobb software you can modify your engine maps to increase power, fuel economy and change many engine settings. Loading the default stage 1 map you can expect to increase your Mazda Rx8 fuel economy by about 5% or 1mpg. The best way to improve you MPG is also the cheapest quite simply by changing the way you drive.
Why does my Mazda RX 8 engine not start?
There is no easily accessible fuel pressure regulator or fuel filter as both are built into the fuel pump assembly. Worst case scenario, if this engine cranks but won’t start it’s likely got bad compression and will require a rebuild, however if your lucky it might be something else.
How does a compression tester work on a Mazda RX 8?
A compression tester is connected to one of the spark plug holes and the engine is cranked until the tester reads a number in PSI. Rotary engines have 3 combustion surfaces per rotor so they require special compression testers to show each of the three faces.