How do you replace a dashboard cluster on a car?
Plug the replacement cluster into the wiring harness and bolt it into the dash using the 1/4-inch ratchet and socket. Reinstall the dashboard bezel using your hands, and push it in place until it clicks into the dash (for other models, reinstall the dashboard bezel by reattaching the removed screws or bolts).
How do you remove an instrument cluster from a car?
Look for a bezel that goes around the instrument cluster and remove it. This can be done by either removing clips or using a Phillips-head screwdriver or a 1/4-inch ratchet and socket to remove the screws or bolts holding it in place. Next, unbolt or unscrew the instrument cluster from the dash.
How do you replace a stock gauge cluster?
Unbolt the stock gauge cluster from the dashboard, using the 1/4-inch ratchet and socket. Pull the cluster towards you, then unplug the wiring harness from the cluster, using your hands. Plug the replacement cluster into the wiring harness and bolt it into the dash using the 1/4-inch ratchet and socket.
How do you remove a bezel on an instrument cluster?
Look for a bezel that goes around the instrument cluster and remove it. This can be done by either removing clips or using a Phillips-head screwdriver or a 1/4-inch ratchet and socket to remove the screws or bolts holding it in place.
How are the bulbs removed from an instrument cluster?
There were two types of bulbs – the indicator/warning bulbs (black plastic) and the instrument illumination bulbs (grey plastic). The indicator/warning bulbs are removed by twisting counterclockwise 90 degrees and lifting up. The instrument illumination bulbs are removed in the same manner – there were three of these.
How can i dim the lights on my dashboard?
Put the key in the ignition and turn it to the “on” or “accessory” position. Then, turn on your headlights. Locate the dimmer switch for your lights. Most vehicles have a dashboard light control switch that will dim the dashboard lights as well as turn them off.
Why are the lights on my dash not working?
Flip the switch or turn the dial or knob up and see if the lights on your dash come on or get brighter. If adjusting the switch doesn’t work, you may have a blown fuse or bad lightbulb. Or, the entire switch may be faulty, in which case, have it replaced by a certified mechanic.
Where are the fuses for the dashboard lights?
Check under the hood, under the dashboard, or near or in the glove compartment. Once you find the fuse box or boxes, remove the lid and check the diagram on the underside of the lid for a fuse labeled “dash lights” or just “lights.” Refer to your owner’s manual if you have trouble locating the fuse boxes or the dashboard light fuse.