Can you replace wheel bearings on a Mazda Protege 5?
Wheel bearing replacement in a 2003 Mazda Protege 5. Press in style bearings done without using a shop press. Specific for Mazda Protege, but many of the techniques will apply to vehicles with pres-in-style wheel bearings. It’s a good idea to try to use the bearing-press-kit the way it was intended.
How do you change wheel bearings on a Mazda?
Jack the car up at the wheel you intend to change the bearings in first. Use the lug wrench to remove the lugnuts holding the wheel on the hub and then pull the wheel off of the hub. Use the screwdriver to pry the grease seal (the cylindrical knob in the middle of the hub) out of the hub’s center.
Can a shop press be used on a Mazda Protege?
Press in style bearings done without using a shop press. Specific for Mazda Protege, but many of the techniques will apply to vehicles with pres-in-style wheel bearings. It’s a good idea to try to use the bearing-press-kit the way it was intended. If the bearing doesn’t budge, BE CAREFUL using a breaker bar.
How long does it take to replace a wheel on a Mazda?
Repeat Steps 1 to 4 for the other three wheels on the Mazda. Allow at least 15 to 20 minutes to perform maintenance on each wheel, as you want plenty of time available to ensure you are disassembling and reinstalling each wheel correctly.
Wheel bearing replacement in a 2003 Mazda Protege 5. Press in style bearings done without using a shop press. Specific for Mazda Protege, but many of the techniques will apply to vehicles with pres-in-style wheel bearings. It’s a good idea to try to use the bearing-press-kit the way it was intended.
Jack the car up at the wheel you intend to change the bearings in first. Use the lug wrench to remove the lugnuts holding the wheel on the hub and then pull the wheel off of the hub. Use the screwdriver to pry the grease seal (the cylindrical knob in the middle of the hub) out of the hub’s center.
Press in style bearings done without using a shop press. Specific for Mazda Protege, but many of the techniques will apply to vehicles with pres-in-style wheel bearings. It’s a good idea to try to use the bearing-press-kit the way it was intended. If the bearing doesn’t budge, BE CAREFUL using a breaker bar.
Can you replace front wheel bearings without press?
It is much easier with a press. This will work for many Makes and Models especially front wheel drive cars. Even some rear or 4 wheel drive will use the same concept. Make sure that you use good quality front wheel bearings so you do not have to do the job again in the near future. This is NOT a sponsored video. Everything is purchased by us!
How to replace the front wheel bearing on a Mazda 3?
If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred. Please try again later. (Playback ID: O6sZy-8dBNA4ky4j)