Is there a way to completely eliminate OnStar?
The only way to completely eliminate OnStar is to physically disconnect the module from your vehicle. Other than the OnStar system and its related services (Automatic Crash Response and Emergency Services), no other system in the vehicle should stop working when you disconnect the module.
Is there any way to replace OnStar connectors?
Use the reverse order of the above steps to replace the pieces in their original positions, except, of course, for the OnStar connectors. The benefits of OnStar can be outweighed by its cost or intrusiveness. For most people, simply cancelling the OnStar subscription is enough.
Where are the screws to deactivate OnStar?
If your vehicle does not have a cargo net in the trunk, the four screws you need to remove should be located in the corners of your trunk. After removing the screws, pull the sill plate up to lift it out of the trunk. Set it and the screws aside in a safe spot while you continue working.
How do I remove the OnStar module box?
Step 6: Remove the three connectors on the OnStar module box. Press the tab down on the cord end that connects with the module box port and pull the connector right out. These connectors are similar to landline telephone cord connectors and should be easy to remove. Step 7: Repeat for remaining connectors.
The only way to completely eliminate OnStar is to physically disconnect the module from your vehicle. Other than the OnStar system and its related services (Automatic Crash Response and Emergency Services), no other system in the vehicle should stop working when you disconnect the module.
Use the reverse order of the above steps to replace the pieces in their original positions, except, of course, for the OnStar connectors. The benefits of OnStar can be outweighed by its cost or intrusiveness. For most people, simply cancelling the OnStar subscription is enough.
If your vehicle does not have a cargo net in the trunk, the four screws you need to remove should be located in the corners of your trunk. After removing the screws, pull the sill plate up to lift it out of the trunk. Set it and the screws aside in a safe spot while you continue working.
Step 6: Remove the three connectors on the OnStar module box. Press the tab down on the cord end that connects with the module box port and pull the connector right out. These connectors are similar to landline telephone cord connectors and should be easy to remove. Step 7: Repeat for remaining connectors.
How can I disable the OnStar equipment on a 2020 Sierra?
How can I disable the Onstar equipment on a 2020 Sierra? I called immediately after picking the truck up and cancelled all trial services, the green light went off. But I want to physically disconnect the system.
Is there a way to disable OnStar GPS tracking?
You can discontinue the service at any time, but even after the service is cancelled, the Onstar GPS still continues to track your current location. To maintain your privacy, you must disable the device. Turn off the vehicle and open the trunk. Lift up the trunk liner. This liner covers the spare tire. Set the liner to the side.
What can you do with OnStar car service?
With Onstar, customers can get turn-by-turn directions to their destination, make hands-free phone calls and have access to emergency crash response and stolen vehicle assistance. These services come at a monthly fee.
How can I disable the Onstar equipment on a 2020 Sierra? I called immediately after picking the truck up and cancelled all trial services, the green light went off. But I want to physically disconnect the system.
How do I disable OnStar GPS on my car?
Unscrew them and set the plate aside. Pull the top right of the trunk shell back to reveal the Onstar device. The device is a metal box with the Onstar logo. Pull out the three wires connected to the Onstar device. Unplugging the device will disconnect it from the power and communication sources.
Where is the OnStar control box in my car?
The Onstar control box should be a small metal box attached to the side of the vehicle (if in the trunk) or inside the plastic paneling (in the dash or behind the glove box). It will usually have an OnStar or LG logo. Don’t remove the box. If you do not see the module on the right side, try the left side of the trunk. Unplug all three connectors.
What to do if you want to stop using OnStar?
If you want to stop using OnStar, dial 1-888-4-ONSTAR (1-888-466-7827), or press the blue button on your OnStar system to contact Customer Service. The agent you speak with will be able to guide you through the process of canceling your service. You may need to provide certain information during the process, such as contact or billing information.
The Onstar control box should be a small metal box attached to the side of the vehicle (if in the trunk) or inside the plastic paneling (in the dash or behind the glove box). It will usually have an OnStar or LG logo. Don’t remove the box. If you do not see the module on the right side, try the left side of the trunk. Unplug all three connectors.
How do you unplug an OnStar silver box?
Locate the three cable connectors on the bottom of the silver box. To unplug a connector, grip its base with two fingers and press them inward, and then pull the plug straight out. Repeat until there are no cables connected to the silver box.