How do you push the start button on a Mazda 6?
When touching the push button start using the backside of the key as shown in the illustration, touch the push button start with the lock switch side of the key facing up. 5. Verify that the push button start indicator light (green) turns on. 6. Press the push button start to start the engine.
Why does my Mazda 6 not start up?
To switch the ignition position again, perform the operation from the beginning. If the KEY warning light (red) illuminates, or the push button start indicator light (amber) flashes, this could indicate that the engine may not start using the usual starting method. Have your vehicle inspected at an Authorized Mazda Dealer as soon as possible.
How do you change the ignition position on a Mazda?
Press the push button start to switch the ignition position. The ignition switches in the order of ACC, ON, and off each time the push button start is pressed. To switch the ignition position again, perform the operation from the beginning.
How do you push the start button on a car?
Touch the push button start using the backside of the key (as shown) while the push button start indicator light (green) flashes. When touching the push button start using the backside of the key as shown in the illustration, touch the push button start with the lock switch side of the key facing up.
When touching the push button start using the backside of the key as shown in the illustration, touch the push button start with the lock switch side of the key facing up. 5. Verify that the push button start indicator light (green) turns on. 6. Press the push button start to start the engine.
To switch the ignition position again, perform the operation from the beginning. If the KEY warning light (red) illuminates, or the push button start indicator light (amber) flashes, this could indicate that the engine may not start using the usual starting method. Have your vehicle inspected at an Authorized Mazda Dealer as soon as possible.
Press the push button start to switch the ignition position. The ignition switches in the order of ACC, ON, and off each time the push button start is pressed. To switch the ignition position again, perform the operation from the beginning.
How to start a Mazda 6 with a dead key?
If the engine cannot be started due to a dead key battery, the engine can be started using the following procedure: 1. Continue to depress the brake pedal firmly until the engine has completely started. 2. (Manual transaxle) Continue to depress the clutch pedal firmly until the engine has completely started. 3.
If the engine cannot be started due to a dead key battery, the engine can be started using the following procedure: 1. Continue to depress the brake pedal firmly until the engine has completely started. 2. (Manual transaxle) Continue to depress the clutch pedal firmly until the engine has completely started. 3.
What should I do if my Mazda 6 cannot reprogram?
When an error occurs during the reprogram procedures, except when the PCM is replaced, repeat the procedure from Step 1. If you still cannot reprogram, confirm how many keys can start the engine. Then, perform the key replacement or addition reprogram procedure according to the valid key number.
How to disable the Mazda 6 service manual immobilizer?
Disable: Key registration can only be performed using the SST (WDS or equivalent). At the time of new vehicle delivery, the function is set on “Enable”. When using a SST (WDS or equivalent) or equivalent to perform “Ignition Key Code Erase” or “Customer Spare Key Programming Enable/Disable”, it is necessary to obtain security access approval.
When an error occurs during the reprogram procedures, except when the PCM is replaced, repeat the procedure from Step 1. If you still cannot reprogram, confirm how many keys can start the engine. Then, perform the key replacement or addition reprogram procedure according to the valid key number.
Disable: Key registration can only be performed using the SST (WDS or equivalent). At the time of new vehicle delivery, the function is set on “Enable”. When using a SST (WDS or equivalent) or equivalent to perform “Ignition Key Code Erase” or “Customer Spare Key Programming Enable/Disable”, it is necessary to obtain security access approval.
When to enable or disable SST on Mazda 6?
At the time of new vehicle delivery, the function is set on “Enable”. When using a SST (WDS or equivalent) or equivalent to perform “Ignition Key Code Erase” or “Customer Spare Key Programming Enable/Disable”, it is necessary to obtain security access approval. 1. Connect the SST
Can a Mazda 6 PCM be changed from another car?
This is because the previously programmed key IDs are erased when reprogramming the key IDs into the PCM. The PCM cannot be changed from one car to another. If an PCM is replaced with one from another car, the engine will not start. The PCM should not be newly replaced as a trial during troubleshooting.
How does a starter work on a Mazda 626?
A reliable Mazda 626 starter from AutoZone supplies the force that starts your engine. The starter’s work begins when you turn the key into the crank position. A 12-volt battery sends an electrical signal to the components of the motor to turn the engine over.
Touch the push button start using the backside of the key (as shown) while the push button start indicator light (green) flashes. When touching the push button start using the backside of the key as shown in the illustration, touch the push button start with the lock switch side of the key facing up.
What to do if your Mazda 6 won’t start?
2009 Mazda 6 won’t start. Green key light comes on (registers the key is present). Everything lights up and the battery is fine. Starter won’t engage. … read more
What should I do if my Mazda warning light keeps coming on?
If any of the following warning lights or the indicator light turns on/flashes, the system may have a malfunction. Contact an expert repairer, we recommend an Authorised Mazda Repairer to have your vehicle inspected. If the ABS warning light stays on while you’re driving, the ABS control unit has detected a system malfunction.
What to do if a Mazda message turns off?
If the message is displayed, stop the vehicle in a safe place and do not operate the steering wheel. There is no problem if the message in the display turns off after a while. Contact an expert repairer, we recommend an Authorised Mazda Repairer if the message is displayed continuously.
Why does my car not start when I Turn on the key?
This feature is not available right now. Please try again later. One possible reason your car wont start is a bad connection. This is one of those things that is often over looked until after the battery or starter or alternator have been replaced or all of the above. if this happens to you check your battery connections. Loading…
Why is my Mazda push button not working?
RED: Indicates that the key cannot be detected, which is common if you place the key in your cup holder. YELLOW: Indicates there may be a problem with the engine starting system, but can also indicate the inability to activate the accessories or switch the ignition.
When do I need to have my Mazda 6 inspected?
Have your vehicle inspected at an Authorized Mazda Dealer as soon as possible. Under the following conditions, the KEY warning light (red) flashes after the push button start is pressed.
How do you start an engine in a Mazda?
Press and hold the push button start until the engine starts. Other procedures necessary for starting the engine, such as having the key in the cabin, and depressing the clutch pedal (manual transaxle) or the brake pedal (automatic transaxle) are required.
RED: Indicates that the key cannot be detected, which is common if you place the key in your cup holder. YELLOW: Indicates there may be a problem with the engine starting system, but can also indicate the inability to activate the accessories or switch the ignition.