What kind of oil does a Mazda 3 2008 take?
Engine Oil
| Viscosity: | 5W-20 (All TEMPS) |
|---|---|
| Capacity: | 4.5 quarts (with filter)After refill check oil level. |
| Torque: | 22-30 ft/lbs (Oil Drain Plug) |
Does a 2008 Mazda 3 need synthetic oil?
For all models, Mazda highly recommends using A5w-30 sae Viscosity motor oil, with the API certification seal. It is preferred over semi-synthetic oil, as it contributes greatly to the overall performance, maintenance and efficiency of the vehicle. Mazda recommends changing the motor oil every 4000 to 5000 miles.
How do you change the oil in a Mazda 3?
For most Mazdas, you can wrap an old belt around the oil filter and unscrew it by hand. If you can’t do this, see our parts page to find a Mazda 3 oil filter wrench. If your 3 is too low to the ground to access your drain plug and oil filter, be sure to use jack stands and safe jacking procedures before getting under your 3.
How to change the oil in a BMW Z3?
3. Find Oil Drain – Locate the oil drain plug underneath the vehicle 4. Drain Oil – Set up the workspace, drain oil and replace plug 5. Find Oil Filter – Locate the oil filter 6. Remove Filter – Position drain pan and remove the oil filter 7. Replace Filter – Add oil to the new oil filter and insert it
What kind of oil does a Mazda CX-7 sport take?
Car Displayed: 2008 Mazda CX-7 Sport 2.3L 4 Cyl. Turbo 6. Remove Filter – Position drain pan and remove the oil filter 7. Replace Filter – Add oil to the new oil filter and insert it 8. Remove Oil Cap – Take off the oil fill cap Car Displayed: 2004 Ford Focus ZTS 2.3L 4 Cyl. 9. Add Oil – Determine the correct oil type and add oil 10.
What kind of oil is in a Mazda Tribute?
Most Mazdas have the oil type printed on the oil cap – it will likely be 5W-20, 5W-30, 5W-40, 10W-30 or 10W-40. If it isn’t printed on the oil cap, check your owners manual for the exact type before adding new oil.
For most Mazdas, you can wrap an old belt around the oil filter and unscrew it by hand. If you can’t do this, see our parts page to find a Mazda 3 oil filter wrench. If your 3 is too low to the ground to access your drain plug and oil filter, be sure to use jack stands and safe jacking procedures before getting under your 3.
3. Find Oil Drain – Locate the oil drain plug underneath the vehicle 4. Drain Oil – Set up the workspace, drain oil and replace plug 5. Find Oil Filter – Locate the oil filter 6. Remove Filter – Position drain pan and remove the oil filter 7. Replace Filter – Add oil to the new oil filter and insert it
Car Displayed: 2008 Mazda CX-7 Sport 2.3L 4 Cyl. Turbo 6. Remove Filter – Position drain pan and remove the oil filter 7. Replace Filter – Add oil to the new oil filter and insert it 8. Remove Oil Cap – Take off the oil fill cap Car Displayed: 2004 Ford Focus ZTS 2.3L 4 Cyl. 9. Add Oil – Determine the correct oil type and add oil 10.
Most Mazdas have the oil type printed on the oil cap – it will likely be 5W-20, 5W-30, 5W-40, 10W-30 or 10W-40. If it isn’t printed on the oil cap, check your owners manual for the exact type before adding new oil.