Why does my Miata squeal?

Why does my Miata squeal?

Probably a loose or worn belt – alternator/water pump belt or ac/power steering belt (if you have it). Look up how to tighten these belts, it’s straight forward and only takes a few minutes. If the car is new to you you might as well just replace the belts – also very straightforward.

Why is there a noise coming from my Miata?

The noise could be as simple as small rocks trapped in the heat shields around the exhaust system. Put the car securely on ramps or jack stands and inspect the shields. Small rocks can be pried out of the shields. When done, crimp the shields to keep this from happening again.

Why does my car make a loud noise when I Turn on the AC?

Loud squealing or screeching is the most common noise drivers experience when they turn on a malfunctioning AC. This sound often signals an issue with your drive belt or serpentine belt.

Why does my car make a squeaking noise when I put on the brakes?

The best way to avoid this type of noise is to choose quality brake pads. If your brakes are squeaking or squealing while driving down the road, but the noise goes away when you press on the brakes, I have a hunch that your brake wear indicator is hitting the rotor and causing the noise.

Are there any problems with my Miata shocks?

My shocks are fine, no leaks, etc. The control arm bushing could be dirty or worn and needs cleaning or replacement. In my Miata, the bushing itself was in good shape and required no replacement. The mechanic cleaned both the right and the left bushing. I paid for no parts.

The noise could be as simple as small rocks trapped in the heat shields around the exhaust system. Put the car securely on ramps or jack stands and inspect the shields. Small rocks can be pried out of the shields. When done, crimp the shields to keep this from happening again.

My shocks are fine, no leaks, etc. The control arm bushing could be dirty or worn and needs cleaning or replacement. In my Miata, the bushing itself was in good shape and required no replacement. The mechanic cleaned both the right and the left bushing. I paid for no parts.

Why does my Mazda A4 make a noise when I brake?

On braking in the wet there can be a loss of braking and some noise related to this problem. Newer Mazda pads have reduced this problem. Look at the color of your pads, green are older and blue are newer (both have the same part number so ordering new pads is not easy). A4:

Why does my car make a vibrating noise when I change the brake pads?

Be certain to use new brake hardware (clips and springs) when replacing brake pads. Changing to a different brand or compound of pads may help. A vibrating noise may be caused by calipers not sliding properly on the mounting brackets. Be certain that caliper pins are lubricated well and the calipers slide on the pins.