What kind of hardtop does a Mazda Miata have?
*Additional shipping charges may apply outside of 48 contiguous states Mazda Miata Fiberglass STREET Hardtop 1999-2005. – Includes rear non-glass MOLDE…
What should I do with my Miata top?
See the Miata Tops section. We recommend nothing other than keeping it clean. Just a mild soap and water is sufficient. Be sure it is dry before putting it down, and if the car is new, take care to be sure the fabric folds correctly. Some people use Convertible top treatments, and some swear by Armor All.
Why are the fabric seats on my Miata wearing out?
The fabric seats usually fade if left in the sun for too long, and the driver side left seat bolster wears out due to constantly getting in and out of the car throughout the years. Check the clutch and brake pedal too.
What happens to the shocks on a Mazda Miata?
While springs seldom wear out, the shocks, the shock mounts and the bump stops do. Replacing old suspension components can have a profound effect on the handling of your MX-5. If the car jolts and crashes on even the tiniest of road imperfections, the upper mounts (top hats) have probably collapsed.
Is there a replica of the Miata hardtop?
This hardtop is the exact replica of the OEM Miata Hardtop. The exterior and interior are identical in every way. OEM Hardtop brackets, OEM seals and the OEM window can be fitted on this top without any problem. We can provide an acrylic window for an extra 150 USD.
What do you need to put a hard top on a Miata?
You already have one pair of striker plates (on the windshield header) and might have the Frankenstein bolts, too. If you have a defroster element and want to use it, you also need a defroster switch, a relay, a fuse block, and a recepticle plug. MX-5.Com has a great tutorial on adding a hard top with photos.
Is there a replica of the Mazda hardtop?
This hardtop is the exact replica of the OEM Miata Hardtop. The exterior and interior are identical in every way. The Hardtop brackets and the seals are not supplied but the OEM ones from Mazda fit on the top! We can provide an acrylic window for an extra 150 USD.
What kind of hardtop does a Mazda MX-5 have?
*Additional shipping charges may apply outside of 48 contiguous states * Includes rear non-glass MOLDED, FULL SIZE window * Includes front, side and Mazda Miata Fiberglass Street Hardtop 1990-1997 – Sale! Mazda Miata Fiberglass Racing Hardtop 1990-1997 – Sale!
Do you need a defroster on a Miata hardtop?
This top has an NB-style pigtail, you you should replace it with the NA-style one. You probably need to add a defroster relay and dash switch. If you have Mazda foglights, you need to use the combo defroster and foglight switch. Otherwise you can use the plain one.
Do you need to replace the pigtail on a Miata?
So you need to replace the pigtail inside the hardtop with the NB-style one. Also, your car’s redesigned striker plates on the windshield header won’t work with the old latches on this top. So you need to replace the hardtop latches with the new-style ones.
What kind of seats does a Mazda Miata have?
Mazda Miata MX-5 Wet Okole Seat Covers 1990-2019+ – SALE! Neoprene Seat Covers by Coverking 1990-2020 – SALE! Mazda Miata MX-5 Seat Designs Seat Covers – HAWAIIAN PATTERN FABRIC 1990-2015 – SALE! MIATA ACME Vinyl Seat Upholstery 1999-2000 Front Buckets with Headrest Speakers Perforated – SALE!
What kind of hardtop does a Miata have?
1992-1997 – Defroster and Headliner – This top has a defroster built into the rear window, along with a wiring pigtail to connect it to the car’s electrical system. This top also adds some more insulation to the inside of the top, reducing noise and heat loss.
This top has an NB-style pigtail, you you should replace it with the NA-style one. You probably need to add a defroster relay and dash switch. If you have Mazda foglights, you need to use the combo defroster and foglight switch. Otherwise you can use the plain one.
So you need to replace the pigtail inside the hardtop with the NB-style one. Also, your car’s redesigned striker plates on the windshield header won’t work with the old latches on this top. So you need to replace the hardtop latches with the new-style ones.
How much does a Mazda MX-5 hardtop cost?
Hardtop (OEM Replica) For Miata NA/NB. $ 875.00 – $ 2,000.00. SKU: CM-HT1-NA Categories: Body Panels, Body Panels, Exterior Parts (See All), Exterior Parts (See All), MAZDA MX-5, NA 89-97, NB 99-05 Tags: carbon fiber hardtop, hardtop replica, miata hardtop. Description.