Do your brake lights come on when you step on the brakes?
Nothing relevant in the OM. It says hill start is automatically active when you turn on the ignition. Implies hill start should never be “not available”. Do your brake lights come on when you step on the brakes?
What does it mean when your shifter is stuck in Park?
If the brake lights are not working – you’ve found the problem. Either the brake light fuse is blown or the brake light switch is faulty. These are the most common reasons for a shifter being stuck in Park.
What causes a car to get stuck in Park?
4) Malfunctioning Ignition Switch. A less common cause for a shifter being stuck in park is a badly worn or faulty ignition switch. What happens here is that the ignition switch, (even after being turned to the “ON” position), does not send a signal to the shift interlock solenoid indicating that the ignition is ON.
Why is my shift brake light not working?
If you’ve verified the brake lights are working correctly then the problem is most likely a faulty shift interlock solenoid. However, before replacing the interlock solenoid, use a digital multi-meter to rule out the problem being an open circuit in the wiring.
Why are the brake lights and parking lights not working?
Just touching the tube where the wires are and boom the fuse blows, and out goes the lights. The brake lights and parking lamps all run off that fuse and are working (for now) but when those frayed wires touch the tail light fuse will blow – and out go all the parking lights, front and rear. Hopefully I find the short in the daylight tomorrow.
If the brake lights are not working – you’ve found the problem. Either the brake light fuse is blown or the brake light switch is faulty. These are the most common reasons for a shifter being stuck in Park.
Why does the shift lever not move out of Park?
It prevents the car from being shifted out of park, if the brake pedal is not depressed. The car is fooled into thinking you don’t have your foot on the brakes if: (1) The main brake light fuse is blown or not making proper contact. (2) If the brake pedal light, switch is faulty.
4) Malfunctioning Ignition Switch. A less common cause for a shifter being stuck in park is a badly worn or faulty ignition switch. What happens here is that the ignition switch, (even after being turned to the “ON” position), does not send a signal to the shift interlock solenoid indicating that the ignition is ON.