What does the a in the p0012 code mean?
The P0012 code indicates that your car’s computer has detected a difference in the desired camshaft position angle and the actual camshaft position angle. The “A” in the P0012 code refers to the intake camshaft in an inline or straight overhead camshaft engine.
What causes the variable camshaft timing code p0012?
This over-retarded timing condition could be during the advancing or retarding phase of the camshaft timing. What causes the P0012 code? The variable camshaft timing (VCT) oil control valve (OCV) stuck in the open position.
What is the diagnostic code for camshaft position a-timing?
Cost of diagnosing the P0012 code. P0012 is a diagnostic trouble code (DTC) for “Camshaft Position A – Timing Over-Retarded (Bank 1)”. This can happen for multiple reasons and a mechanic needs to diagnose the specific cause for this code to be triggered in your situation.
What causes the ECM to trigger a p0012 fault?
Here are a few things which could cause the ECM to trigger a P0012 fault: Contaminate engine oil (rare fault). Inadequate oil flow to the variable camshaft timing (VCT) oil control valve (OCV). Defective VCT oil control valve (OCV). Control valve more than likely stuck in open position. Defective camshaft phaser.
The P0012 code indicates that your car’s computer has detected a difference in the desired camshaft position angle and the actual camshaft position angle. The “A” in the P0012 code refers to the intake camshaft in an inline or straight overhead camshaft engine.
This over-retarded timing condition could be during the advancing or retarding phase of the camshaft timing. What causes the P0012 code? The variable camshaft timing (VCT) oil control valve (OCV) stuck in the open position.
Cost of diagnosing the P0012 code. P0012 is a diagnostic trouble code (DTC) for “Camshaft Position A – Timing Over-Retarded (Bank 1)”. This can happen for multiple reasons and a mechanic needs to diagnose the specific cause for this code to be triggered in your situation.
What to do if your Ford F-150 has a p0012 code?
For instance, a P0012 on a 2005 Ford F-150 can be resolved by topping up the engine oil, if that’s what’s triggering the issue. Switching out the timing chain or replacing the engine assembly are also confirmed fixes for this specific code on a Ford.
For instance, a P0012 on a 2005 Ford F-150 can be resolved by topping up the engine oil, if that’s what’s triggering the issue. Switching out the timing chain or replacing the engine assembly are also confirmed fixes for this specific code on a Ford.
What should I do if my OBD-2 fault code comes back?
The codes should then be reset to clear the OBD-II fault codes and retest the vehicle to see if the P0012 code comes back. Commands the oil control solenoid valve on and off to see if the camshaft timing changes.
How much does it cost to repair a p0012 Ford?
Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. What does this mean? The cost of diagnosing the P0012 FORD code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
Why does the Ford F150 have a p0012 camshaft?
This allows for a more efficient cam profile at any speed. With P0012, the camshaft actuator is leaving the timing retarded. Camshaft Position Actuators change the lift of the camshaft up to 25 degrees. They are hydraulic, which means that they use the vehicle’s engine oil to control lift.
Why does my Ford Escape have a p0012?
With P0012, the camshaft actuator is leaving the timing retarded. Camshaft Position Actuators change the lift of the camshaft up to 25 degrees. They are hydraulic, which means that they use the vehicle’s engine oil to control lift. So, if you have low oil pressure or dirty oil, it can keep them from doing their job properly, and trigger P0012.