What type of transmission fluid does a 2010 Mazda 3 take?
In Your 2010 Mazda3 , You should use a full synthetic Mercon ATF fluid, such as Valvoline MaxLife’s, which sells for $30 at O’Reilly’s. This will be suitable for both topping off a low transmission fluid reservoir as well as using for a full flush.
What color is Mazda M5 transmission fluid?
Red is the color of the transmission fluid when it’s first put into your Mazda, so it’s safe to say that fluid is still in good shape if it is this hue. The fluid is clean, viscous, and able to continue to lubricate your transmission’s parts when it’s red or bright red.
What type of transmission fluid does a 2010 Mazda 5 take?
Lubegard Synthetic Synthetic Transmission Fluid Dexron VI 1 Quart.
How to check the transmission fluid level in a Mazda 3?
Transmission Fluid Level Check Mazda 3 (2010-2013) – 2010 Mazda 3 i 2.0L 4 Cyl. See how to correctly check the transmission fluid level in a 2010 Mazda 3 i 2.0L 4 Cyl.. The engine should be running when you check the transmission fluid dipstick on a 2010 Mazda 3 i 2.0L 4 Cyl. About Us Maintenance Parts & Tools Contact English
What kind of fluid does a Mazda use?
Make sure to add the recommended Mazda automatic transmission fluid or a compatible alternative. Mazda recommends Mazda ATF MV transmission fluid (also referred to as M5 ATF or Mazda V). Mazda MV ATF is not the same as Mercon V or Dexron automatic transmission fluid, a common misconception.
What to do if your transmission fluid level is low?
If your Mazda transmission fluid level is low, you may experience shifting problems such as: Warm-up transmission. Drive your vehicle for at least ten minutes. This will allow your Mazda transmission fluid to warm up. Ensure your Mazda is parked on a level surface. Ensure the parking brake is set—shifter in Park. Do not turn off the engine.
How do you change the transmission on a Mazda?
Park your Mazda. Set the parking brakes. Move the shifter to Park position. Open the hood. Remove the dipstick. The automatic transmission dipstick is located next to the battery. Use a funnel to insert it into the dipstick tube. Add half a quart of Mazda Automatic Transmission Fluid (ATF). Recheck the fluid level.
Transmission Fluid Level Check Mazda 3 (2010-2013) – 2010 Mazda 3 i 2.0L 4 Cyl. See how to correctly check the transmission fluid level in a 2010 Mazda 3 i 2.0L 4 Cyl.. The engine should be running when you check the transmission fluid dipstick on a 2010 Mazda 3 i 2.0L 4 Cyl. About Us Maintenance Parts & Tools Contact English
Where to find transmission fluid in Mazda CX-9?
The video above shows where the transmission fluid dipstick is located in your CX-9 and how to check the transmission fluid level. If the transmission fluid level in your CX-9 is low, you need to add transmission fluid through the dipstick tube.
Make sure to add the recommended Mazda automatic transmission fluid or a compatible alternative. Mazda recommends Mazda ATF MV transmission fluid (also referred to as M5 ATF or Mazda V). Mazda MV ATF is not the same as Mercon V or Dexron automatic transmission fluid, a common misconception.
If your Mazda transmission fluid level is low, you may experience shifting problems such as: Warm-up transmission. Drive your vehicle for at least ten minutes. This will allow your Mazda transmission fluid to warm up. Ensure your Mazda is parked on a level surface. Ensure the parking brake is set—shifter in Park. Do not turn off the engine.