How do I replace rear wheel hub assembly?

How do I replace rear wheel hub assembly?

You are removing the spindle at this point – remove the lower control arm bolt and sway bar bolts from the lower end of the spindle and then remove the two larger bolts that connect the top part of the spindle to the strut – Please note that your jack or jack stand should NOT BE ON ANY PART OF THE REAR SUSPENSION – it should be hanging freely.

What causes a loose wheel bearing on a Lexus?

Loose steering is often caused by a loose wheel hub bearing. Here’s a step-by-step guide to replacing it. This article applies to the Lexus (2005-2013).

How do you replace a wheel on a Lexus?

Loosen lug nuts on the wheel. Raise the car using a jack and secure the vehicle with jack stands. Figure 2. Raise and secure the vehicle. Once you have the wheel off, you can begin to remove the brake caliper and the disc brake. Figure 3. Remove brake components.

Where is ABS speed sensor on Lexus RX330?

Remove the ABS speed sensor on the inside of the spindle – there is one bolt off to the side of the sensor that is predominately mounted to a metal plate – careful – set aside. 6.

How do you replace a wheel bearing on a Lexus?

Using a 17mm socket, undo the nut on the bottom of the tie rod. Using pliers, remove the cotter pin; save and set aside. Using the gear puller or control arm puller, release the control arm.

You are removing the spindle at this point – remove the lower control arm bolt and sway bar bolts from the lower end of the spindle and then remove the two larger bolts that connect the top part of the spindle to the strut – Please note that your jack or jack stand should NOT BE ON ANY PART OF THE REAR SUSPENSION – it should be hanging freely.

Remove the ABS speed sensor on the inside of the spindle – there is one bolt off to the side of the sensor that is predominately mounted to a metal plate – careful – set aside. 6.

What causes a Lexus steering wheel to loose?

Loose steering is often caused by a loose wheel hub bearing. Here’s a step-by-step guide to replacing it. This article applies to the Lexus (2005-2013). If you ever feel a little play or wiggle room in your Lexus’ steering wheel, you probably have a bad wheel hub bearing.