What to do if your stereo system stops working?
If all of your stereo components stop working, find the receiver’s circuit breaker or fuse, usually on the back panel, and: * Reset the breaker or replace the fuse with one of the same rating. * If the blowout recurs, have the receiver professionally repaired.
Why are the speakers on my laptop not working?
Also only right speaker was “talking”, despite the fact that only left side of the laptop was watered. Then there was no sound at all, not from the speakers, nor from the headphones. Also microphone’s not working. USB ports are okay. The water was spilled from the left side of the laptop.
What should I do if my CD player won’t play?
If both speakers now work, the problem is in the turntable, CD player or tape deck. Such repairs are best done by a professional. * If wire-jiggling eliminates the problem, clean all terminals, lugs, connectors and jack plugs at both ends of the wire. Use fine sandpaper to remove corrosion from metal surfaces.
What to do if your stereo has a hum?
Don’t open a sealed cabinet; the delicate interior parts should be professionally repaired. If your stereo develops a low frequency hum, first tighten the terminal and jack connections. If the hum persists, other options to try include: * Separate cables connecting the stereo components from the power cords (they shouldn’t touch).
If all of your stereo components stop working, find the receiver’s circuit breaker or fuse, usually on the back panel, and: * Reset the breaker or replace the fuse with one of the same rating. * If the blowout recurs, have the receiver professionally repaired.
Don’t open a sealed cabinet; the delicate interior parts should be professionally repaired. If your stereo develops a low frequency hum, first tighten the terminal and jack connections. If the hum persists, other options to try include: * Separate cables connecting the stereo components from the power cords (they shouldn’t touch).
If both speakers now work, the problem is in the turntable, CD player or tape deck. Such repairs are best done by a professional. * If wire-jiggling eliminates the problem, clean all terminals, lugs, connectors and jack plugs at both ends of the wire. Use fine sandpaper to remove corrosion from metal surfaces.
What should I do if my stereo is not working?
* Separate cables connecting the stereo components from the power cords (they shouldn’t touch). * Make sure the ground wire is connected to the ground terminal, a screw on the back of the receiver.
What’s the best way to refresh your radio?
Follow these Steps to Refresh Your Radio: Refreshing your radio is a quick and easy process that you can do at either online (recommended) or by phone. 1) Before you start! Have your 12-digit Radio ID (or ESN#) available. (Don’t know it? See “How to Find my Radio ID/ESN” below or check the communication you may have received from SiriusXM.)
Why does my car stereo keep restarting?
If the fence is torn and not working correctly, then repair the cable. Cut the cord and twist it and attach it again on the stereo. Do the same for the ride wire if it is damaged. If the problem is in memory wire, then it will work for sure, and your stereo will not restart itself again. Losing Power when the Engine Cranks.
How to reset my Honda radio after putting in a new battery?
Step 1 Turn the ignition key to the “On” position, but don’t start the engine. Turn the radio on by pressing in on the volume control knob. After 10 seconds, turn the radio off. Press and hold the power button for two to five seconds and watch the radio display. Release the power button when the display lights up and the radio turns on.