Why does the fuse blow at twice the rated output?
The fuse is designed to blow at almost twice the rated output and presumably the equipment has been designed to withstand the extra current for the short time it takes until the fuse blows
What should I do if my Charger light is not working?
If the charger has no output Voltage then check to see if it has a fuse and replace the fuse if necessary, then retest the charger. If the charger does not have a fuse then it may need to be repaired or replaced. Next test the Voltage of the battery pack at the charger port.
Why does the charge light on the battery charger flash?
The CHARGE light may flash for the following reasons: 1 The environmental temperature is too cold to charge the battery pack. 2 The battery pack has not been used for a long time. 3 There is a poor connection between the battery and charger. 4 There is a problem with the battery pack. More …
Can a 12 volt charger be left on for too long?
Hi, nope it is a sealed unit with no switch, just a straight 12 volt, I have used it for many years with the correct 5amp fuse but had to fit a 10amp when my local supplier had no 5amps for me, he said it would be okay, I guess he was wrong. I left the charger on for 24 hours and this was obviously too long.
What does it mean when a fuse is blown?
Yet people commonly use the expression “blown fuse” to describe just about any unexpected electricity-related occurrence, especially one involving a loss of power. A “blown fuse” can mean many different things–several of which have little to do with actual fuses.
If the charger has no output Voltage then check to see if it has a fuse and replace the fuse if necessary, then retest the charger. If the charger does not have a fuse then it may need to be repaired or replaced. Next test the Voltage of the battery pack at the charger port.
What to do if your promariner Charger has a blown fuse?
If you don’t see any of the above, your charger either has a blown fuse, or circuit board problem. You can remove the small cover (it has 4 screws on it), and the large cover with the fan on it (it has 6 screws). Remove the large cover carefully since the fan and the A/C terminal block is attached to the main circuit board.
Why does the Charger light stay green when charging?
When the red light turns off and only the green light is on that indicates that the battery pack is charged and the vehicle is ready to use. If the charger light stays green and there is no red light when the charger is plugged into the vehicle and into the wall this could be caused by many things.