How does the Lexus tire pressure warning system work?
The tire pressure warning system in your Lexus is what determines when one or more tires is low on air. this is extremely helpful because it’ll prevent you from having to manually check your tires all the time in the North Andover, Peabody, and Danvers areas.
How to fix a low tire pressure light?
Next step in the process is to press the located button for three seconds. Once the light blinks for three times on the dashboard, this means the TPMS is reset. After this, turn off the engine and again start it after five seconds (from the time, light blinks). This would resolve the issue.
When to inflate the tires on a Lexus TPMS?
Drive the vehicle above 30mph for at least 10 minutes and monitor the low tire pressure monitor to ensure it does not blink. Inflate all tires to the pressure listed on the vehicle placard.
Where is the reset button on a Lexus TPMS?
Inflate all tires to the pressure listed on the vehicle placard. Turn ignition to the ON position with the engine OFF (not the ACC position). Hold down the pressure warning reset switch (located on the lower driver side dash panel or in the glove box) until the TPMS indicator blinks 3 times.
Why does my tire pressure light come on in my Lexus?
This article covers what to do when your tire pressure light comes on in your Lexus. This article applies to the Lexus (2005-2013). When your tire pressure light goes on, the problem could be low tire pressure in one or more tires. However, it could also mean that you have a flat tire.
When to reset the tire pressure sensor on a Lexus?
Park the car in a safe spot and turn the engine off. Fill the tires to the appropriate air pressure. You’ll want to do this when the tires are “cold” or when the vehicle has been sitting for at least a few hours. Turn the engine switch to Ignition On mode.
Next step in the process is to press the located button for three seconds. Once the light blinks for three times on the dashboard, this means the TPMS is reset. After this, turn off the engine and again start it after five seconds (from the time, light blinks). This would resolve the issue.
Drive the vehicle above 30mph for at least 10 minutes and monitor the low tire pressure monitor to ensure it does not blink. Inflate all tires to the pressure listed on the vehicle placard.