How to turn off the air bag light in Lexus LS400?
Let the ground wire lay on the floor then you can easily touch the Tc and AB wires against it. Start by touching the end of the Tc wire to the ground wire for one second. After a second, instantly remove the Tc wire and replace it with the AB wire touching the ground wire for one second.
What does code 41 mean on Lexus LS400?
After several seconds the air bag light will blink fast in a 64msec cycle, this means code 41 has been cleared. Tc + ground, AB + ground, Tc + ground, AB + ground, Tc + ground and hold. -This is all about timing.
Is there a 41 code for the air bag light?
No connection between the pins on the data link connector on the 93 for clearing the air bag light. You procedure mentions clearing a 41 code, that is not even mentioned for the 93. There is no 41 code for the supplemental restraint system for the 93 model.
How does the air bag warning light work?
connect pins 4 and 13 together and the warning light will flash out a code. Normally two digits so if you get 1 flash, pause and then 3 flashes it is error code 13. If there is more than 1 error there will be a longer pause between error codes and it then repeats. This will give you the current code (s).
Let the ground wire lay on the floor then you can easily touch the Tc and AB wires against it. Start by touching the end of the Tc wire to the ground wire for one second. After a second, instantly remove the Tc wire and replace it with the AB wire touching the ground wire for one second.
After several seconds the air bag light will blink fast in a 64msec cycle, this means code 41 has been cleared. Tc + ground, AB + ground, Tc + ground, AB + ground, Tc + ground and hold. -This is all about timing.
connect pins 4 and 13 together and the warning light will flash out a code. Normally two digits so if you get 1 flash, pause and then 3 flashes it is error code 13. If there is more than 1 error there will be a longer pause between error codes and it then repeats. This will give you the current code (s).
How to fix your airbag SRS warning light?
A no cost easy way to reset and fix your airbag SRS warning light. Perform this with the ignition key in the off position. Please subscribe, like and comment. You might also like to watch https://youtu.be/yMXm5IVQW9A Loading…
How to reset the air bag warning light?
Turn the ignition key to ACC or On for at least 6 seconds before doing anything. Then you touch TC to ground for 1 second, remove the TC ground and then Apply the AB ground for 1 second. Repeat this for 2 cycles and then apply a steady ground to TC and hold it for a few seconds. The air bag light should start blinking rapidly.
How to clear code 41 on Lexus LS400?
Finally, instantly replace the AB wire with the Tc wire and hold the Tc wire on the ground wire for several seconds. After several seconds the air bag light will blink fast in a 64msec cycle, this means code 41 has been cleared. Tc + ground, AB + ground, Tc + ground, AB + ground, Tc + ground and hold.
No connection between the pins on the data link connector on the 93 for clearing the air bag light. You procedure mentions clearing a 41 code, that is not even mentioned for the 93. There is no 41 code for the supplemental restraint system for the 93 model.
When does the airbag warning light turn off?
This way, if no one is in the passenger seat, the airbag won’t deploy unnecessarily. Every time the engine is started, the computer does a quick check on the system to make sure everything is working as intended. When you start your car, the airbag warning light will turn on for a few seconds and should turn off automatically if everything is okay.
A no cost easy way to reset and fix your airbag SRS warning light. Perform this with the ignition key in the off position. Please subscribe, like and comment. You might also like to watch https://youtu.be/yMXm5IVQW9A Loading…
Is there a way to reset the airbag light?
The airbag light will often go away by itself after repairing the problem, but not in all car models. After you have installed the new parts and are 100% sure that the parts are installed correctly, it’s time to reset the engine light. To do this – you need to use an OBD2 scanner, and it’s not possible in another way.
How can I tell if my airbag sensor is working?
To determine if the sensor is working okay, first check the “Passenger Airbag Off” indicator. If the seat is vacant, this light should be on. When the seat is occupied it should turn off implying that the airbag system is online and functioning. If the light is off when the seat is vacant or vice-versa, there could be a problem with the sensor.
How to reset an airbag light you it still runs?
Start the engine. The SRS light should come on for seven seconds, and then shut off and stay off. The airbag light has been reset. If you continue to drive your vehicle with the SRS light illuminated, you may risk an accidental deployment of the airbag. “How To Use Automotive Diagnostic Scanners (Motorbooks Workshop)”; Martin; 2008