Can a MAF sensor cause a lean condition?
If you understand that a defective mass air flow (MAF) sensor can cause an extremely lean condition by underestimating the amount of air flowing into the engine, then you can understand how a defective MAF sensor can be mistaken for a defective fuel pump assembly.
Can a faulty MAF sensor cause a p0171 code?
If you start replacing MAF sensors, O2 sensors, etc., you will probably spend a lot of money without results. A faulty O2 sensor is not a very common cause of the P0171 code, even if many people start to replace it directly when they see this code. Diagnosing the P0171 code is easy if you have the right tools to do it.
What causes a lean mixture on the p0171 code?
Intake leaks are a widespread problem when it comes to the P0171 code. Intake/Vacuum/boost pipe leaks can trick the MAF sensor and cause a lean mixture. The MAF sensor measures all air that is going into the engine and telling the engine control unit which amount of air it is.
What does the p0171 code on an OBD2 mean?
P0171 OBD2 Trouble Code: System Too Lean (Bank 1) A P0171 code appears in the engine control unit when the Oxygen sensor on bank 1 recognizes a too lean air-fuel mixture for the sensor to correct it. Several different things could cause this trouble code. Here is what you need to know about the P0171 code.
What are the symptoms of check engine light p0171?
What Are The Symptoms Of P0171? 1 Check Engine Light is on 2 Lack of power from the engine 3 Rough idle 4 Engine coughing 5 Engine misfiring
What to do if check engine light code p0171 is triggered?
If check engine light code P0171 is triggered again, check the rest of the vacuum lines for leaks and continue to the rest of the diagnostic process. Remove the mass airflow sensor and clean the sensor using mass air flow cleaner or contact cleaner.
If you start replacing MAF sensors, O2 sensors, etc., you will probably spend a lot of money without results. A faulty O2 sensor is not a very common cause of the P0171 code, even if many people start to replace it directly when they see this code. Diagnosing the P0171 code is easy if you have the right tools to do it.
Can a bad mass air flow sensor trigger a check engine light?
Bad mass air flow sensor with no check engine light? Sometimes a mass airflow sensor can start to fail and even trigger engine error codes such as P0101 and P0102, without triggering a check engine light. There must be a problem with the mass airflow sensor circuit for the check engine light to illuminate.
What are the symptoms of a p0171 leak?
What Is The Cause Of P0171? 1 Dirty or faulty mass airflow sensor 2 Vacuum leaks – PCV hoses, vacuum hoses, intake manifold gasket. 3 Weak fuel pump 4 Clogged or dirty fuel injectors 5 Clogged fuel filter 6 Exhaust leak 7 Faulty oxygen sensor 8 Faulty air-fuel ratio sensor
If either code arrives (or both) at the same time as, say, a Mass Airflow Sensor code, it’s a logical step to assume the MAF sensor may be causing the lean condition.
What does it mean when engine Bank 2 is too lean?
A lean condition is brought about by an imbalance in the air to fuel ratio due to either insufficient fuel (from, say, a weak fuel system) or excessive air entering the engine. The bank 2 portion indicates that the problem is concentrated on the side of the engine opposite the #1 cylinder. The error codes for these conditions are P0171 and P0174.
How to fix automotive engine lean exhaust codes?
Begin with the vehicle parked on flat ground in park with the emergency brake set. Step 1 – Once a check engine or service engine soon light has determined a lean engine code has materialized, a repair procedure inspection is needed.
Where do I find the lean fault code on my car?
So your car’s CEL (always check Engine Light) is on and also you had the codes scanned at a local parts shop. (Or maybe used your own OBD scanner to extract the car faults). Your car or truck has either a P0171, P0174 lean fault code or both stored in the pc, these codes derive from Oxygen Sensor (O-2) readings.