Where is the fuel pump located on a Mini Cooper?
See our tech article on seats removing. The fuel pump /sending unit is located in the left (green arrow) side of the fuel tank. The sending unit / fuel filter / siphon unit are located on the right (red arrow) side. Once you have removed the rear seat, remove the four 10mm nuts from the access panel (red arrows).
Where is the fuel level sender on a Mini Cooper?
There are two fuel level senders, one in each lobe on the left and right sides underneath the rear seat cushion. The right fuel tank lobe holds the fuel level sender and fuel filter, while the left tank lobe holds the fuel pump.
Where is the fuel filter on a Mini Cooper R56?
The fuel supply system in a MINI R56 consists of: The fuel tank is two-lobed. There are two fuel level senders, one in each lobe on the left and right sides underneath the rear seat cushion. The right fuel tank lobe holds the fuel level sender and fuel filter, while the left tank lobe holds the fuel pump.
Where is the fuel pump located in a car?
If you have a petrol engine with an electronic fuel pump, the fuel pump is often not very expensive. The expensive part is letting a mechanic replace the pump. The pump is often located inside the fuel tank, which means that there is a cover to reach it from under the back seat if you are lucky.
How does a sensor work on a fuel pump?
Fortunately, modern cars are riddled with sensors that can detect any number of problems as they happen. Among those sensors is a fuel pressure sensor placed intelligently near the fuel pump. If there is any irregularity detected, the sensor sends a signal to the ECU, which illuminates the Check Engine Light.
Why do you need a fuel pump in your car?
The fuel pump is an important component of your vehicle. Without it, your car would die imminently In all modern gas and diesel vehicles, a fuel pump is necessary, whereas, in older vehicles, the function depends solely on gravity to deliver the fuel.
How does the Check Engine light work on a fuel pump?
One of these sensors is a fuel pressure sensor that is intelligently measuring the fuel pressure. If an irregularity is detected, the sensor sends a signal to the ECU, which lights up the check engine light. You can easily check the error code displayed by the Check Engine Light through an OBD2 Scanner.