Does Advance auto Parts replace tail lights?
Our Parts Professionals will install wiper blades and replacement bulbs free of charge (with purchase of wiper blades or bulbs). Whether you’ve bought front or rear wipers (or both), headlights or tail lights, we’d be happy to install them for you.
What to do if your tail light has come loose?
Open the trunk and take a look. You can see where the wires should connect in order for the electrical system to properly work. If a wire has come loose, reattach it. On most new cars, the wiring harness is located behind panels in the trunk and is not accessible without removing the panels. Check the taillight bulbs.
When to take a tail light bulb to the mechanic?
If the bulb is fine, your car may have a deeper electrical problem. If the fuse, taillight wires, and bulb are all in good shape, it’s time to take the car to the mechanic. When you remove a bulb for replacement, you should inspect the socket for burnt contacts and the tail lamp for burnt contacts or melted socket boards.
What’s the name of the bulb on the tail light?
Most tail lamps have stop lamp/turn indicator bulb(s), reverse lamp bulb, tail lamp bulbs, side marker bulb, and on some models a self standing turn indicator bulb. On cars where the brake and turn signal are sharing a bulb, when the bulb is burnt out, the turn signal indicator will flash faster than normal.
Can you use glass cleaner to fix tail lights?
Do not use glass cleaner to clean the area because the ammonia in the glass cleaner will cause the tape not to stick as well as it should. The last wipe with rubbing alcohol will remove most of the impurities and leave a clean surface. Measure the size of the crack and cut the tape slightly larger than the damage of the lens.
Open the trunk and take a look. You can see where the wires should connect in order for the electrical system to properly work. If a wire has come loose, reattach it. On most new cars, the wiring harness is located behind panels in the trunk and is not accessible without removing the panels. Check the taillight bulbs.
If the bulb is fine, your car may have a deeper electrical problem. If the fuse, taillight wires, and bulb are all in good shape, it’s time to take the car to the mechanic. When you remove a bulb for replacement, you should inspect the socket for burnt contacts and the tail lamp for burnt contacts or melted socket boards.
Most tail lamps have stop lamp/turn indicator bulb(s), reverse lamp bulb, tail lamp bulbs, side marker bulb, and on some models a self standing turn indicator bulb. On cars where the brake and turn signal are sharing a bulb, when the bulb is burnt out, the turn signal indicator will flash faster than normal.
Do not use glass cleaner to clean the area because the ammonia in the glass cleaner will cause the tape not to stick as well as it should. The last wipe with rubbing alcohol will remove most of the impurities and leave a clean surface. Measure the size of the crack and cut the tape slightly larger than the damage of the lens.