What does the coolant temperature sensor connect to?
The sensor is connected to the engine computer (PCM). The PCM supplies the reference voltage (typically 5 Volt); another wire is the sensor ground. Both the reference voltage and the ground must be checked first. Since the resistance of the sensor drops as the engine warms up, the voltage drops too.
What should the temp of the coolant sensor be?
Check that the temperature value of the CTS is around 80-90c when the engine is hot. A lot of engine coolant temperature sensors have two wires and the sensor is controlled by Ohm. Get a wiring diagram and find out what ohms you should have at a specific temperature to check the function.
How does a coolant temp sender work?
Today’s coolant temp senders have two wires, one wire is feed a small amount of voltage from the computer while the second wiring is read by the computer and the engine temperature determined.
Can a car have more than one coolant sensor?
Some vehicles may have more than one temperature sensors, as sometimes different sensors are used to send the signals to the dashboard and the control unit of your engine system. This is optional and a manufacturer can use only one coolant temperature sensor to send the signals to both of these desired receivers.
What to do when your coolant sensor is replaced?
Properly dispose of used coolant. Step 16: Lower vehicle from jack stands. Place the vehicle back level to the ground. Once the coolant temperature sensor has been replaced, you need to start the engine, check for leaks, and refill the radiator fluid in most cases before you test drive the vehicle.
Check that the temperature value of the CTS is around 80-90c when the engine is hot. A lot of engine coolant temperature sensors have two wires and the sensor is controlled by Ohm. Get a wiring diagram and find out what ohms you should have at a specific temperature to check the function.
Some vehicles may have more than one temperature sensors, as sometimes different sensors are used to send the signals to the dashboard and the control unit of your engine system. This is optional and a manufacturer can use only one coolant temperature sensor to send the signals to both of these desired receivers.
Are there coolant temp sensors for Ford Ranger?
Rest assured that we stock customized sensors designed specifically for your make and model, such as a Dodge Ram coolant temp sensor and coolant temperature sensors for Ford Ranger pick-up trucks.You can enjoy our Same Day Pickup option when ordering online.
Why does my car coolant sensor keep dropping?
If there is a leak in the engine bay and the oil enters the engine block, the coolant will get contaminated, causing a problem to the ECT sensor. The coolant system of the car does not need constant refilling. However, if the coolant level is dropping frequently, there might be a leak which should be fixed immediately.