Will Mustang rims fit a Thunderbird?
Registered. Mustang wheels fit the MN12 T-Birds with the addition of mustang front hubs and 99 and up Cobra rear hubs, and brake rotor and or drum swapping or machining.
What is the bolt pattern on a 2004 Ford Mustang?
Ford Mustang Bolt Pattern Chart
| Mustang Generation | Model Year Range | Bolt Pattern |
|---|---|---|
| Mustang II | 1974-1978 | 4 x 108mm |
| Fox Body | 1979-1993 | 4 x 108mm |
| SN95 | 1994-2004 | 5 x 114.3mm |
| S197 | 2005-2014 | 5 x 114.3mm |
What is the bolt pattern on a Ford Thunderbird?
Ford Thunderbird wheel bolt pattern. Select the year
| Thunderbird Bolt Pattern | PCD 5×108 See Adapters |
|---|---|
| Stock wheel offset | 34 to 45 mm Get Wheel Spacers |
| Center bore (hub bore) | 64.0 Find Hub Centric Rings |
| Thread size | M12 x 1.5 Buy Lug Nuts |
| Stock Rim Sizes Range | 17×7.0 – 20×8.5 Get Hubcaps |
What is the bolt pattern on a 2003 Ford Thunderbird?
2003 Ford Thunderbird Bolt Patterns
| Year/Make/Model/Option | Bolt Patterns |
|---|---|
| 2003 Ford Thunderbird Base Model | 5x108mm (5×4.25″) |
What kind of wheels do I need for a 1994 Mustang?
Don’t forget new lug nuts, wheel spacers, wheel studs, and other wheel accessories or tools to get the job done! These Wheels Fit: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, and 2004 Mustang.
What kind of tire do I need for a 1979 Mustang?
The 1979-90 Mustang had a smaller front fender opening when compared to the 1991-93 Mustang. Without clearance problems or tire rub, the best appearing and performing set up here is to run a 17×8 front wheel with a 245/45/17 tire and for the rear you can run a 17×9 wheel with a 275/40/17 tire with no clearance problems.
Can a Bullitt wheel be used on a Mustang?
You can still use a Bullitt wheel on the front, but you will be missing a front center cap. Other factory 94-04 Mustang factory style wheels won’t clear the larger center hub at all, causing a dangerous situation where the wheel will not seat on the rotor.
Can a 10 ” wide wheel fit on a fox mustang?
While every vehicle may vary slightly because of suspension and modifications, there are three main things that will be required to get a 10″ wide wheel to fit correctly on the rear of a Fox Mustang: Removal of the Quad shock. (Removing this will require upgraded Rear control arms to prevent Wheel Hop)