What kind of rear end does a Ford Mustang have?
All 1979-1985 Mustangs featured the 7.5 rear end. Starting in 1986 Ford introduced the popular 8.8” rear end in the Mustang. From 1986-2010 the Ford Mustang 8.8 rear end went into all V8 Mustangs (5.0L, 4.6L and 5.4L) and the Ford 7.5” rear end went into all 4 cylinder (2.3L) and V6 Mustangs (3.8L).
Where can I find a 2003 Ford Mustang?
To find cars in your area, please enter your ZIP code. Please enter a valid 5-digit ZIP code. 15.7 gal. 15.7 gal. Wondering which configuration is right for you?
How many axles does a Ford Mustang have?
The 2005-2010 V6 Mustangs with a Ford 7.5 rear end used 28 spline rear axles whereas the 2005-2010 V8 Mustangs with 8.8”rear ends used 31 spline rear axles. For 2011-2014 Mustangs, both the V6 and 5.0L V8 Mustang were equipped with 31 spline axles.
What’s the difference between a 2003 Mustang and a 2002 Mustang?
2003 brings important safety improvements to the Mustang. Several new measures are designed to reduce wind noise, the suspension has been retuned, and the V6 and V8 engines get some minor refinements. Mustang comes in coupe and convertible body styles.
What kind of wheels does a 2008 Mustang Bullitt have?
The 2008 Mustang Bullitt wears unique cast-aluminum Euroflange wheels, offering a modern twist on the original movie car. The Dark Argent Gray spokes feature a satin finish, while a pight-machined lip completes the look. Calipers are colored to match the wheel.
What’s the rear axle ratio on a Mustang?
Starting in 2011, the V6 (3.7L) was upgraded to feature the same Ford 8.8” rear end found in the V8 (5.0L Coyote) Mustangs. One of the first steps to knowing your Mustang rear axle ratio is knowing which rear end is actually under the backside of your pony car.
What kind of axle do you need for disc brakes on a Mustang?
If you are looking to upgrade to a disc brake setup from a 94-04 Mustang, you are going to need the SN95 flange axles along with a set of caliper brackets. The SN95 flange axles are hubcentric to allow a perfect fit with the 94+ rotors. A popular swap among Fox Body owners is the 94-98 rear end swap.
All 1979-1985 Mustangs featured the 7.5 rear end. Starting in 1986 Ford introduced the popular 8.8” rear end in the Mustang. From 1986-2010 the Ford Mustang 8.8 rear end went into all V8 Mustangs (5.0L, 4.6L and 5.4L) and the Ford 7.5” rear end went into all 4 cylinder (2.3L) and V6 Mustangs (3.8L).
More aggressive front pads were developed specifically for Bullitt and improve fade resistance and pedal feel. The 2008 Mustang Bullitt wears unique cast-aluminum Euroflange wheels, offering a modern twist on the original movie car. The Dark Argent Gray spokes feature a satin finish, while a bright-machined lip completes the look.
How does wheel alignment work on a Mustang?
Wheel alignment specs with adjustment illustrations are available by subscription for all Mustang models HERE The Third Generation Mustang has a strut front suspension, which is OE adjustable for Camber, and Toe. Camber is adjustable at the top of the strut where it attaches to the body. (See Illustration here.)
Starting in 2011, the V6 (3.7L) was upgraded to feature the same Ford 8.8” rear end found in the V8 (5.0L Coyote) Mustangs. One of the first steps to knowing your Mustang rear axle ratio is knowing which rear end is actually under the backside of your pony car.
How many seats does a 2014 Mustang GT have?
Seating capacity Four Four Front headroom 38.5 38.8 Front legroom 42.4 42.4 Front shoulder room 55.3 55.3 Front hip room 53.4 53.4 Rear headroom 34.7 36.5 2014 FORD MUSTANG GT TECHNICAL SPECIFICATIONS Rear legroom 29.8 29.8 Rear shoulder room 51.6 45.0 Rear hip room 46.8 45.2 WEIGHTS AND CAPACITIES
How big is the sway bar on a Ford Mustang?
All Mustang GT and Convertibles came with a rear sway bar with white links during these years; the bar diameter varied with options and was 18 mm, 19 mm, 20 mm, or 22.4 mm. Replacement links from Ford are colored black or oxide coated For 2006, a less expensive version of the Mustang was introduced as the new base model.
Where are the speakers on a Ford Mustang?
The Mach 460’s added power came from a pair of amps mounted between the rear seats and the trunk. The amps took care of the lower door speakers and rear deck speakers, while the front and rear tweeters ran off the stock receiver.
How are the back seats on a Ford Mustang?
The cabin is spacious up front, but the back seats are very small. For securing child safety seats, the Mustang has two complete sets of LATCH car-seat connectors on the rear seats. The lower anchors are set deeply in the seats, and it requires some force to attach the car-seat straps.
What kind of space does a Ford Mustang have?
Trunk space is excellent, and the infotainment technology is user-friendly. The rear seats are small, but that’s to be expected for a vehicle in this class. “There’s nothing rough, just classy materials, attractive gauges, supportive seats and cool metallic toggle switches.”
What are the dimensions of a 2005 Ford Mustang?
Overall Length: 188.0 ” Overall Width: 73.9 ” Rear Head Room: 34.7 ” Rear Leg Room: 30.3 ” Wheelbase: 107.1 ” Displacement: 281 cu.in. Engine liters: 4.6 Fuel tank capacity: 16.0gal. Diameter: 17.0″ Curb weight: 3,483 lbs. Max cargo capacity: 13 cu.ft. Towing Capacity: 1,000 lbs.
The Mach 460’s added power came from a pair of amps mounted between the rear seats and the trunk. The amps took care of the lower door speakers and rear deck speakers, while the front and rear tweeters ran off the stock receiver.
How big is the rear axle on a 1998 Mustang?
– 1994-1998 Mustang rear axles are 3/4″ wider on each side than a 79-93 Mustang. – 1999 and newer Mustang rear axles are about 1 7/16″ wider on each side than a 79-93 Mustang. – 94 and newer Mustang 8.8 will bolt into a 79-93 Mustang but will require brake line adapters.
What’s the gear ratio on a 1979 Mustang?
Use this guide to have your Mustang gear ratio explained! If you own a 1979 to current Mustang, then it came equipped with one of the two Ford rear ends – Mustang 7.5” rear end or the Ford Mustang 8.8” rear end.
Is the 94-98 rear end the same as the 99-04?
The 94-98 rear end consists of the same housing as the Fox, with axles that are .75″ longer on each side. The 99-04 rear end has a different, wider housing and that coupled with the longer axle increases track width by 1.25″ per side over a fox.
– 1994-1998 Mustang rear axles are 3/4″ wider on each side than a 79-93 Mustang. – 1999 and newer Mustang rear axles are about 1 7/16″ wider on each side than a 79-93 Mustang. – 94 and newer Mustang 8.8 will bolt into a 79-93 Mustang but will require brake line adapters.
Use this guide to have your Mustang gear ratio explained! If you own a 1979 to current Mustang, then it came equipped with one of the two Ford rear ends – Mustang 7.5” rear end or the Ford Mustang 8.8” rear end.
The 94-98 rear end consists of the same housing as the Fox, with axles that are .75″ longer on each side. The 99-04 rear end has a different, wider housing and that coupled with the longer axle increases track width by 1.25″ per side over a fox.
The 2005-2010 V6 Mustangs with a Ford 7.5 rear end used 28 spline rear axles whereas the 2005-2010 V8 Mustangs with 8.8”rear ends used 31 spline rear axles.
How do you decode the rear end of a Mustang?
Lift the rear of the Mustang using a floor jack under the differential housing. Place jack stands under the Mustang’s rear axle tubes and lower the car onto the stands for support. Slide under the car and clean off any accumulation of grease and dirt with a shop towel.
How big is the rear axle on a 1979 Mustang?
All 1979 Mustang rear axles through the 1985 fox body Mustangs featured the 7.5” rear, with the exception of the very first year of the Fox that was equipped with a “carry-over” 6.75” rear end from the Mustang II that was only behind the 4-cylinder and 6-cylinder variants.
What kind of rear axle does a Ford Mustang have?
All 79-04 Ford Mustang Rear Ends used 28 spline axles except for the 2001 and 03-04 SVT Cobras – they used a 31 spline axle in their IRS rear end. The 2005-2010 V6 Mustangs with a Ford 7.5 rear end used 28 spline rear axles whereas the 2005-2010 V8 Mustangs with 8.8”rear ends used 31 spline rear axles.
When did the Ford Mustang rear end come out?
Share this article! The Ford Mustang rear end specifications have changed quite a bit since the beginning of the Fox Chassis in 1979.
What was the year of the 1997 Mustang?
The 1997 Mustang was largely a continuation of the 1996 year. Very little changed in terms of either external details or internal components. This is great because with several years all very close together the aftermarket scene for these cars is fantastic, with plenty of part upgrades and performance modifications available.