How to change the drive belt on a Kia Optima?

How to change the drive belt on a Kia Optima?

The only tool needed to change the main drive belt is a 17mm wrench or a 17mm socket with a 3/8″ or 1/2″ drive ratchet. To replace the water pump’s stretch belt, you’ll need a belt cutter (or scissors / a knife), some plastic cable ties (also known as “zip” ties) and a deep socket set with a 1/2″ drive ratchet to turn the crankshaft pulley.

What kind of belt do I need for the coolant pump?

Two compatible elastic or “stretch” belts for the coolant pump to the crankshaft are the Dayco E030305 and the Bando 3PK796F. The only tool needed to change the main drive belt is a 17mm wrench or a 17mm socket with a 3/8″ or 1/2″ drive ratchet.

What kind of battery does a Kia Optima have?

Owners of other Kia, Hyundai or Genesis vehicles such as the Niro, Sportage, Sedona, Telluride, Sorento, Rio, Forte, Soul, K900, Cadenza, K5, Stinger, Tucson, Santa Fe, Kona, Palisade, Elantra, Sonata, Accent, Veloster, Ioniq, Nexo, Venue, G70, G80 and G90 may also find these DIY instructions to be helpful.

Does a Kia Optima have a timing belt or timing chain?

The 1.6L Turbocharged 4 cylinder Kia Optima engine from 2016 to 2020 has a timing chain and is interference. The 2.5L V6 Kia Optima engine from 2001 has a timing belt and is interference. 2.4L 4 Cyl.

How do you change the belt on a Kia serpentine?

Move the serpentine belt tensioner pulley off the belt using the belt tool. Slide the belt off the tensioner pulley with your other hand and then relax the tensioner and remove the tool. Pull the belt off the pulleys and out from under the engine well by hand.

When do I need to replace my timing belt?

When to replace the timing belt? 1 Every 60k-90k miles. If an engine is equipped with a timing belt, the timing belt must be replaced at the service interval specified by the vehicle manufacturer regardless of whether 2 Engine stops abruptly or will not start. 3 Rough engine operation. 4 Banging or clanking engine noise.

Where is the parking brake on a Kia?

Drive the front wheels of the Kia onto the ramps. Set the parking brake. Place the wheel chocks directly behind the rear wheels. Climb under the front end with the serpentine belt tool. Move the serpentine belt tensioner pulley off the belt using the belt tool.