How do you reset the TPMS on a 2014 Kia Sportage?
First You will need to put the vehicle in the on position without the engine running. From there You can press and hold the TPMS reset button located on Your dash next to Your steering wheel. Keep holding that button until the TPMS light begins to flash and then release it. Now You can start Your car and drive off.
How do you reset a Kia TPMS sensor?
Turn ignition to the ON position with the engine OFF (not the ACC position). Connect the scan tool to the OBDII port and upload the sensor IDs. Turn the ignition to the OFF position. Re-scan each sensor. Drive the vehicle above 30mph for at least 10 minutes and monitor the low tire pressure monitor to ensure it does not blink.
How do you reset a tire pressure sensor?
To reset the system, first make sure the tire pressures are correct. Turn the engine on, then press and hold the reset button. You’ll find it low and to the right of the steering wheel on the instrument panel. Hold the button down until the TPMS indicator light in the instrument panel blinks slowly 3 three times.
Where is the TPMS reset switch in the car?
Hold down pressure warning reset switch (located under the steering wheel or in glove box) (insert image of the reset switch) until the TPMS telltale light blinks three (3) times. It will take several minutes for the ECU to receive the signals from the sensors and complete initialization.
Where is the reset button on a Kia?
Apply parking brake and turn ignition to ON position with the engine OFF (not the ACC position). Hold down pressure warning reset switch (located under the steering wheel or in glove box) (insert image of the reset switch) until the TPMS telltale light blinks three (3) times.
Where is the TPMS reset button on Kia Sportage?
Where is the TPMS reset button on Kia Sportage? Hold down pressure warning reset switch (located under the steering wheel or in glove box) (insert image of the reset switch) until the TPMS telltale light blinks three (3) times. Click to see full answer.
How does tire pressure monitor work on Kia Sportage?
All models of Kia Sportage are equipped with Tire Pressure Monitoring System or TPMS which lets the driver know the air pressure of all four tires via instrument cluster display. Tire pressure monitoring systems are used to monitor tire pressure in motor vehicles in order to prevent accidents caused by incorrect tire pressure.
Hold down pressure warning reset switch (located under the steering wheel or in glove box) (insert image of the reset switch) until the TPMS telltale light blinks three (3) times. It will take several minutes for the ECU to receive the signals from the sensors and complete initialization.
To reset the system, first make sure the tire pressures are correct. Turn the engine on, then press and hold the reset button. You’ll find it low and to the right of the steering wheel on the instrument panel. Hold the button down until the TPMS indicator light in the instrument panel blinks slowly 3 three times.