What kind of coolant should I use on my Kia Sorento?
The engine in your vehicle has aluminum engine parts and must be protected by an ethylene-glycolbased coolant to prevent corrosion and freezing. DO NOT USE alcohol or methanol coolant or mix them with the specified coolant.
What should I do about my Kia Sorento engine?
Doing so might lead to cooling system and engine damage and could result in serious personal injury from escaping hot coolant or steam. Turn the engine off and wait until it cools down. Use extreme care when removing the radiator cap. Wrap a thick towel around it, and turn it counterclockwise slowly to the first stop.
Is it OK to remove radiator cap on Kia Sorento?
Do not use a solution that contains more than 60% antifreeze or less than 35% antifreeze, which would reduce the effectiveness of the solution. For mixture percentage, refer to the following table. Do not remove the radiator cap when the engine and radiator are hot.
When to fill coolant reservoir in Kia Soul?
The high-pressure cooling system has a reservoir filled with year round antifreeze coolant. The reservoir is filled at the factory. Check the antifreeze protection and coolant level at least once a year, at the beginning of the winter season, and before traveling to a colder climate.
When to refill coolant in a Kia Sorento?
It takes time to bleed out all the air in the cooling system. Refill coolant when coolant gets cool completely, when recheck the coolant level in the reservoir tank for 2~3 days after replacing coolant. 1. Cooling fan 2. Radiator upper hose 3. Radiator lower hose 4. Radiator 5. Condenser 6. Side air guard 7. Over flow hose 8.
What kind of engine does a Kia Sorento have?
It was powered by engines ranging from 2.4 L inline 4-cylinder petrol engine to 3.5 L V6 petrol engine, and engines were attached to 5-speed and 6-speed manual transmissions as well as 5-speed and 6-speed automatic transmissions.
What should I look for in a Kia Sorento?
In order not to shorten your Kia Sorento’s lifespan and not waste money on oil, you might as well inspect the water pump, oxygen sensor, coolant reservoir, oil filter, drive belt, water pump gasket and air filter just in case. Second, braking and suspension failures.
How do you drain coolant from Kia Rio?
1. Make sure the engine and radiator are cool to the touch. 2. Remove radiator cap (A). 3. Loosen the drain plug (A), and drain the coolant. 4. Tighten the radiator drain plug securely. 5.