How do you reset the tire pressure light on a Kia Rio?
Reset the sensor by driving at or above 50 mph for around 10 minutes. Doing so should reset it the next time you turn on the vehicle. Turn the vehicle off, then turn the key to its “On” position without starting the engine. Hold the TPMS reset button until the tire pressure light blinks three times.
What does the TPMS light mean on a Kia Rio?
Tire Pressure Monitoring System
TPMS stands for “Tire Pressure Monitoring System.” TPMS sensors are built into your vehicle’s tires to measure their air pressure. If one of your vehicle’s tires isn’t at the correct pressure, the sensor goes off, and the light on your vehicle’s dash alerts you to add air to your Kia vehicle’s tires.
Where is the TPMS button on a Kia Rio?
Hold down pressure warning reset switch (located under the steering wheel or in glove box) (insert image of the reset switch) until the TPMS telltale light blinks three (3) times.
Do you need TPMS specific wheels for Kia Rio?
You must use TPMS specific wheels. It is recommended that you always have your tires serviced by an authorized Kia dealer. Even if you replace the low pressure tire with the spare tire, the Low Tire Pressure Telltale will blink or remain on until the low pressure tire is repaired and placed on the vehicle.
How do you reset a Kia TPMS sensor?
Turn ignition to the ON position with the engine OFF (not the ACC position). Connect the scan tool to the OBDII port and upload the sensor IDs. Turn the ignition to the OFF position. Re-scan each sensor. Drive the vehicle above 30mph for at least 10 minutes and monitor the low tire pressure monitor to ensure it does not blink.
What should I do if my Kia tire pressure is low?
Have the tire with TPMS serviced or replaced by an authorized Kia dealer. You may not be able to identify a low tire by simply looking at it. Always use a good quality tire pressure gauge to measure the tire’s inflation pressure.
How do you change tire pressure on a Lexus TPMS?
Inflate all tires to the pressure listed on the vehicle placard. Starting with the LF tire, use the scan tool to scan each sensor in the following order: LF, RF, RR, LR (and full size spare if equipped). Turn ignition to the ON position with the engine OFF (not the ACC position). Connect the scan tool to the OBDII port and upload the sensor IDs.
You must use TPMS specific wheels. It is recommended that you always have your tires serviced by an authorized Kia dealer. Even if you replace the low pressure tire with the spare tire, the Low Tire Pressure Telltale will blink or remain on until the low pressure tire is repaired and placed on the vehicle.
Have the tire with TPMS serviced or replaced by an authorized Kia dealer. You may not be able to identify a low tire by simply looking at it. Always use a good quality tire pressure gauge to measure the tire’s inflation pressure.
Turn ignition to the ON position with the engine OFF (not the ACC position). Connect the scan tool to the OBDII port and upload the sensor IDs. Turn the ignition to the OFF position. Re-scan each sensor. Drive the vehicle above 30mph for at least 10 minutes and monitor the low tire pressure monitor to ensure it does not blink.
What happens to the tire pressure monitoring system?
Tampering with, modifying, or disabling the Tire Pressure Monitoring System (TPMS) components may interfere with the system’s ability to warn the driver of low tire pressure conditions and/or TPMS malfunctions.