How to remove the drive belt tensioner on a Kia Sorento?
1. Remove the drive belt. 2. Remove the drive belt auto tensioner (A). Tensioner pulley bolt is left-hands screw. 3. Remove the drive belt tensioner (A). 4. Install in the reverse order of removal. 1. Remove the drive belt. (Refer to Timing System – “Drive Belt”) 2. Remove the idler (A). Tightenin 1. Remove the drive belt.
How to install timing chain on Kia Sorento?
1. Install the balance shaft chain. 2. Install the crankshaft chain sprocket (B) and the timing chain oil jet (A). 3. Set the crankshaft so that the key (A) of crankshaft will be aligned with the mating surface of main bearing cap.
When do I need to replace my timing belt?
When to replace the timing belt? 1 Every 60k-90k miles. If an engine is equipped with a timing belt, the timing belt must be replaced at the service interval specified by the vehicle manufacturer regardless of whether 2 Engine stops abruptly or will not start. 3 Rough engine operation. 4 Banging or clanking engine noise. …
What causes the timing belt to jump gears?
The molded, reinforced teeth on the timing belt engage gears on the crankshaft and camshafts. After many tens of thousands of miles, the teeth can wear or break, or the belt can stretch, thus causing the belt to jump position on the crankshaft or camshaft gears.
How do you change the timing belt on a Kia Sorento?
To change the Timing belt you have to take the accesory belts and brackets in the front of the engine to reach the timing belt. The lowermost one is the crankshaft pulley, which has a bolt recall (03 sorento). If this bolt breaks, KIA will also give you a new engine because it is easier than to fix it. At least that is what the rep told me.
When did the pulley bolt on my Kia Sorento break?
Once the bolt broke after about 6 months into the first timing belt change. I took it to the dealer and they were going to charge me $150 to see if it was broken, and then refund me the money when they fix it. It was 30 days from the recall cutoff.
Is there a problem with the Kia Sorento engine?
Problem Description In order to correct a problem with the Kia Sorento 3.5l V6 engine that results in difficulty starting, engine vibration, or a rattling soundfrom the engine compartment, Kia released an updated crankshaft pulley bolt.
What’s the timing belt interval on a Kia Optima?
Kia timing belt interval All (1994-2005) {20} 2.0L Spectra (2007-09) {58} 2.0L Sportage (2007-10) {68} 2.4L (2006) {70} 2.7L Optima MS (2006) {70}
How does a Kia Sorento timing chain work?
Crankshaft pulley → A/C pulley → Alternator pulley → Idler #1 pulley → Idler #2 pulley → Water pump pulley → Tensioner pulley. 1. Intake camshaft 2. Exhaust camshaft 3. Intake CVVT assembly 4. Exhaust CVVT assembly 5. Timing chain 6. Timing chain guide 7. Timing chain tensioner arm 8.
Why is my serpentine belt squeaking on my Kia Optima?
If you have Kia and your serpentine belt is squeaking this video might help you solve the problem. Most of the Kia Vehicles equipped with certain engines such as Kia Sportage, Kia Optima, Kia Sorento, Kia Forte, Kia Rio might have manual belt tensioners. Belts tend to stretch over time.
How to install a drive belt on a Kia Sorento?
2. Install the drive belt (A). Rotate the drive belt tensioner arm (A) counterclockwise moving the tensioner pulley bolt with wrench. After putting the belt on the tensioner pulley, release the tensioner pulley slowly. Crankshaft pulley → A/C pulley → Alternator pulley → Idler #1 pulley → Idler #2 pulley → Water pump pulley → Tensioner pulley. 1.
Crankshaft pulley → A/C pulley → Alternator pulley → Idler #1 pulley → Idler #2 pulley → Water pump pulley → Tensioner pulley. 1. Intake camshaft 2. Exhaust camshaft 3. Intake CVVT assembly 4. Exhaust CVVT assembly 5. Timing chain 6. Timing chain guide 7. Timing chain tensioner arm 8.
If you have Kia and your serpentine belt is squeaking this video might help you solve the problem. Most of the Kia Vehicles equipped with certain engines such as Kia Sportage, Kia Optima, Kia Sorento, Kia Forte, Kia Rio might have manual belt tensioners. Belts tend to stretch over time.
1. Remove the drive belt. 2. Remove the drive belt auto tensioner (A). Tensioner pulley bolt is left-hands screw. 3. Remove the drive belt tensioner (A). 4. Install in the reverse order of removal. 1. Remove the drive belt. (Refer to Timing System – “Drive Belt”) 2. Remove the idler (A). Tightenin 1. Remove the drive belt.
How do you change the belt on a Kia serpentine?
Move the serpentine belt tensioner pulley off the belt using the belt tool. Slide the belt off the tensioner pulley with your other hand and then relax the tensioner and remove the tool. Pull the belt off the pulleys and out from under the engine well by hand.