How do you check the transmission fluid in a Kia Rondo?
How Do I Check The Transmission Fluid Level?
- First, remove the dipstick from under the hood (if you are unsure as to where it is located, check your owner’s manual).
- The handle is usually a bright color (generally yellow or red).
- Remove the stick, wipe it clean, replace, and then remove it again.
How do I check my ATF fluid?
Pull out the dipstick, wipe it clean, replace it slowly, and then pull it back out. Check the fluid level—how high the fluid comes up on the dipstick—against the “full” and “low” or “fill” marks on the dipstick. The color of transmission fluid can tell you a lot about the health of your car’s transmission.
What should the fluid level be in a Kia Rondo?
Drive the vehicle until the fluid temperature rises to the normal temperature (70 – 80°C), and then check the fluid level again. The fluid level must be at the HOT mark. Firmly insert the oil level gauge(A) into the oil filler tube. Ask Your Own Kia Question Customerreply replied 9 years ago
How do you change the oil in a Kia Rondo?
Move the select lever through all positions, and then move it to the “N” position. Drive the vehicle until the fluid temperature rises to the normal temperature (70 – 80°C), and then check the fluid level again. The fluid level must be at the HOT mark. Firmly insert the oil level gauge(A) into the oil filler tube.
How do you check the ATF in a Toyota truck?
Toyota techs utilize the Toyota computerized scan tool to accurately verify the ATF temperature. Since most of us have no access to the Toyota tool, we must utilize method “B” and use the trucks onboard diagnostic system (OBD).
How much ATF can you drain in a Toyota?
If you should remove the overflow plug now, have a pan ready as fluid will spill. Place your drain pan underneath the transmission fluid pan and remove the 14mm drain plug. You may want to gather the “used” ATF so you can measure exactly what had been drained – in my case it turned out to be 2.9 liters (3.0 quarts).