Does a 2006 Kia Rio have a timing belt?
All 2006 Kia Rio engines have a timing belt and are interference.
How to install timing chain on Kia Cee’d?
Install the timing chain guide (A) and the timing chain (B). When installing a timing chain, align the timing marks on the sprockets with paint marks of the chain. Order : Crankshaft sprocket → Timing chain guide → Intake CVVT sprocket → Exhaust CVVT sprocket.
How to install timing system on Kia Rio?
32. Connect the intake OCV (Oil control valve) connector (A) and the exhaust OCV (Oil control valve) connector (B). 33. Connect the A/C compressor switch connector (A), the alternator connector (B) and the cable from the alternator “B” terminal (C).
How to install timing chain on Hyundai Accent?
Install the timing chain guide (A) and the timing chain (B). When installing a timing chain, align the timing marks on the sprockets with paint marks of the chain. Order : Crankshaft sprocket → Timing chain guide → Intake CVVT sprocket → Exhaust CVVT sprocket. 5. Install the chain tensioner arm (A). 6.
Where is the liquid gasket on a Kia Rio?
Apply the liquid gasket (TB 1217H or LOCTITE 5900H) on the surface between the cylinder head and the cylinder block. Width : 3 ~ 5mm (0.1181~0.1969in.) Apply the liquid gasket, THREE BOND 1282B or THREE BOND 1216E on the water pump contact parts (A) of the timing chain cover and THREE BOND 1217H or LOCTITE 5900H on the rest parts (B).
How long does it take to install timing chain on Kia Rio?
Reassemble the cover within 5 minutes. Remove oil or dust on the surface surely. Align the dowel pin of the cylinder block and the holes of the oil pump. Tighten the bolts to install the timing chain cover (A). After the installation, do not crank engine or apply pressure on the cover for half an hour. 8.
Install the timing chain guide (A) and the timing chain (B). When installing a timing chain, align the timing marks on the sprockets with paint marks of the chain. Order : Crankshaft sprocket → Timing chain guide → Intake CVVT sprocket → Exhaust CVVT sprocket. 5. Install the chain tensioner arm (A). 6.
Apply the liquid gasket (TB 1217H or LOCTITE 5900H) on the surface between the cylinder head and the cylinder block. Width : 3 ~ 5mm (0.1181~0.1969in.) Apply the liquid gasket, THREE BOND 1282B or THREE BOND 1216E on the water pump contact parts (A) of the timing chain cover and THREE BOND 1217H or LOCTITE 5900H on the rest parts (B).