How to override limp home on Kia Optima?
Turn the ignition switch to the ACC position. 3. To enter the first digit (in this example “2”), turn the ignition switch to the ON and ACC position twice. Perform the same procedure for the next digits between 3 seconds and 10 seconds (for example, for “3”, turn the ignition ON and ACC 3 times).
What to do if your Kia Optima windows are not working?
Move the switch in both directions and listen for the motor to work. If it does not, check the back-side of the switch with the voltmeter as it is operated to see if there is power to the terminals when activated. If there is power, the motor is bad. If there is no power, the switch is bad.
Is the Kia Optima equipped with an immobilizer?
Your vehicle may be equipped with an electronic engine immobilizer system to reduce the risk of unauthorized vehicle use. Your immobilizer system is comprised of a small transponder in the ignition …
How to fix a Kia Optima side view mirror?
Start by removing the two Phillips screws in the area of the arm rest and the one screw that holds a plastic cover in front of the door handle. Remove the plastic cover over the retaining nuts for the outside side-view mirror.
Why are the doors not working on my Kia Optima?
When it is hot and the sun is shining down on the vehicle for a long period of time, the drivers door and rear passenger door locks will not operate from the key fob? when it cools down such as evening or early morning the locks work just fine from the key fob? seems to be related to hot or cool weather.
Can a 2003 Kia Optima be unlocked with a remote?
Tl-the contact owns a 2003 kia Optima. The contact stated that while parked, the vehicle’s door locks failed. The contact tried using the remote and could lock the doors but not unlock them. The contact has been using the keys to unlock the doors.
Where are the power windows on a Kia Optima?
The power windows in the Kia Optima get their power from a fuse under the driver’s side dash. The power window switch in the driver’s door has an automatic-down circuit board under the driver’s side window switch. All the windows can be operated from the driver’s door as well as from the individual doors.
Start by removing the two Phillips screws in the area of the arm rest and the one screw that holds a plastic cover in front of the door handle. Remove the plastic cover over the retaining nuts for the outside side-view mirror.