When to replace the alternator on a Kia Spectra?
The 2002 Kia Spectra´s alternator belt provides power to the engine. Just like other engine components, the alternator belt undergoes normal wear and tear and needs to be replaced to prevent engine failure. A whining that emanates from the front of the engine indicates that it is time to replace the …
How do you install a new alternator belt?
Install the new alternator belt. It must run around the alternator pulley, the water pump pulley and the alternator pulley. With the new alternator belt in place, adjust it over the pulleys by bringing the alternator back to its original position, away from the engine.
How do you check the belt tension on a Kia Spectra?
Crank the KIA Spectra and let the motor run for 30 seconds. Turn the motor off and recheck the tension on the belt. Close the hood. You can also check the tension on the belt by using a belt tensioner checking tool that can be purchased at most auto-parts store.
How do you remove an alternator from a water pump?
Locate the alternator belt and loosen it from its pulleys by applying pressure to the alternator and moving it in the direction of the engine. Once the alternator belt is loosened, pull it off from its pulleys. Install the new alternator belt. It must run around the alternator pulley, the water pump pulley and the alternator pulley.
What is the alternator on a Kia Spectra 5?
The alternator belt on the KIA Spectra 5 is a single belt that controls the alternator and the water pump. The alternator/water pump belt is controlled by the crankshaft pulley. When the engine is running, the crankshaft turns the belt around the alternator pulley and the water pump pulley.
Crank the KIA Spectra and let the motor run for 30 seconds. Turn the motor off and recheck the tension on the belt. Close the hood. You can also check the tension on the belt by using a belt tensioner checking tool that can be purchased at most auto-parts store.
How do you tighten the pivot bolt on a Kia Spectra?
Tighten the locking nut on the adjustment bracket tight with the ratchet and socket. Then, tighten the bottom alternator pivot bolt tight with the ratchet, extension and socket. Crank the KIA Spectra and let the motor run for 30 seconds. Turn the motor off and recheck the tension on the belt.
How do you get the alternator belt out of the water pump?
Turn the adjustment bolt at the end of the alternator adjustment bracket counterclockwise with the ratchet and a socket until the belt is loose. Pull the belt out of the alternator pulley, water pump pulley and the crankshaft pulley. Then, route the belt around each fan blade. Pull the belt out of the engine area.
How do you remove a belt from an alternator?
Locate the adjustable bolt at the top of the adjustment bracket. Loosen the bolt by turning it counterclockwise with the ratchet and the same socket. This will loosen the belt. Slide the belt out from under the adjustment pulley. Then, pull the belt out of the alternator pulley and the crankshaft pulley. Remove the belt from the engine compartment.
How can I check the tension of my alternator belt?
Crank the Protege and let the motor run for around 10 to 15 seconds to completely seat the belt to the inside of the pulleys. Then, turn the motor off and close the hood. The tension of the alternator belt can also be checked with a belt tension checking tool. You can buy this tool at most auto-parts stores that also sell engine belts.
How do you replace an alternator in a car?
With the new alternator belt in place, adjust it over the pulleys by bringing the alternator back to its original position, away from the engine. Make sure the belt is tight around the pulleys, then tighten the pivot bolt on top of the alternator. Re-attach the ground cable to the battery and close the car hood.
The 2002 Kia Spectra´s alternator belt provides power to the engine. Just like other engine components, the alternator belt undergoes normal wear and tear and needs to be replaced to prevent engine failure. A whining that emanates from the front of the engine indicates that it is time to replace the
With the new alternator belt in place, adjust it over the pulleys by bringing the alternator back to its original position, away from the engine. Make sure the belt is tight around the pulleys, then tighten the pivot bolt on top of the alternator. Re-attach the ground cable to the battery and close the car hood.
When do you Know It is time to replace the alternator belt?
A whining that emanates from the front of the engine indicates that it is time to replace the alternator belt. The belt´s appearance can also be telling. If it looks frayed or worn down, it should be replaced.
Locate the alternator belt and loosen it from its pulleys by applying pressure to the alternator and moving it in the direction of the engine. Once the alternator belt is loosened, pull it off from its pulleys. Install the new alternator belt. It must run around the alternator pulley, the water pump pulley and the alternator pulley.
How do you loosen the alternator belt on a car?
Locate the alternator belt and loosen it from its pulleys by applying pressure to the alternator and moving it in the direction of the engine. Once the alternator belt is loosened, pull it off from its pulleys. Install the new alternator belt.
How do you change an alternator on a Kia Rio?
How to Replace an Alternator in a Kia Rio. Remove the air duct from the air cleaner to the throttle body by using a screwdriver to loosen the clamps and pulling the hose off. Loosen the power steering belt by using a socket to turn the tensioner bolt to relieve the tension on the belt. Remove the belt.
How do you change the alternator on a Kia Sportage?
How to Replace the Alternator on a Kia Sportage. Raise the hood on the Kia Sportage and remove the negative battery cable with a wrench. Locate the alternator either on the lower right or lower left side. Disconnect the main alternator output wire on the back of the alternator by removing the retaining nut. Pull the wire off of the stud.
How to Replace an Alternator in a Kia Rio. Remove the air duct from the air cleaner to the throttle body by using a screwdriver to loosen the clamps and pulling the hose off. Loosen the power steering belt by using a socket to turn the tensioner bolt to relieve the tension on the belt. Remove the belt.
How to Replace the Alternator on a Kia Sportage. Raise the hood on the Kia Sportage and remove the negative battery cable with a wrench. Locate the alternator either on the lower right or lower left side. Disconnect the main alternator output wire on the back of the alternator by removing the retaining nut. Pull the wire off of the stud.
How do you change an alternator on a Kia Sedona?
Install the air duct from the air cleaner to the throttle body and tighten the clamps with the screwdriver. Connect the negative battery terminal and tighten with a wrench. Park the Sedona and turn off the engine. Remove the keys from the ignition and open the hood. Put on the gloves. Remove the terminal connections on the battery.
Install the air duct from the air cleaner to the throttle body and tighten the clamps with the screwdriver. Connect the negative battery terminal and tighten with a wrench. Park the Sedona and turn off the engine. Remove the keys from the ignition and open the hood. Put on the gloves. Remove the terminal connections on the battery.
How do you remove an alternator from a car?
Remove the alternator’s top bolt, and swing the alternator out toward the fender. Remove the electrical connectors on the back of the alternator. Use a wrench to remove the heavy battery wire and just pull the plastic field plug out of its socket. Remove the remaining bolts in the alternator.