What does it mean when Kia check engine light comes on?

What does it mean when Kia Check Engine Light comes on? When your check engine light illuminates your Kia vehicle, it means that the vehicle’s Electronic Control Unit (ECU), or computer, which controls many aspects of your Kia’s operation, has found a problem with the engine or emissions system.

Can a check engine light go off by itself?

Will the check engine light go off by itself? Yes, The check engine light will reset itself after a fixed amount of time if you fixed the problem in most car models. Usually, this is 10-30 cycles. One cycle is from a cold start until the engine is at working temperature.

How can I read the Check Engine Light code?

You can read Kia check engine light codes yourself using an OBD-II scanner. This method applies only to Kia vehicles that are the model year 1996 and newer. Locate the OBD-II port under the dashboard. Plugin your scanner into the OBD-II port. Turn on the ignition. Do not start the engine.

What does it mean when your check engine light is blinking?

If the check engine light is flashing, it means there is a critical problem that needs to be addressed right away. If this ever happens when you are driving, pull over as soon as it is safe to do so. Allow the engine to cool down. When the check engine light is blinking, it is not safe to operate the vehicle.

What causes a Kia Optima engine to misfire?

There are other misfire related codes as well, but those are the most common ones. Keeping in mind that any engine needs air, fuel, and spark for ignition, your Kia Optima’s fuel system can often cause the engine to misfire. It can run too lean or rich.

What happens if you have a flashing engine light?

Driving with a flashing engine light can result in more expensive problems with your engine. One example is if the car is misfiring/not running at all on one cylinder, and you keep driving for a long distance, you can either fill up the catalytic converter with fuel and destroy it.

What causes a flashing check engine light on a Kia Optima?

While a majority of the time, the flashing check engine light is going to be caused by a misfire related to your Optima’s ignition system or fuel system (as stated above), there are other issues that can cause it. Your timing chain could have jumped .

Where is the Check Engine light on a Kia?

This method applies only to Kia vehicles that are the model year 1996 and newer. Locate the OBD-II port under the dashboard. Plugin your scanner into the OBD-II port. Turn on the ignition. Do not start the engine. Allow the scanner to power on. Select Read Codes on your scanner. Write down all the codes that are Present or Current.

Why is my Check Engine light flashing and car shaking?

If your car’s control system discovers problems that it cannot handle, the check engine light will turn on. In addition, the computer will have a trouble code stored in the memory. The code’s main function is to determine the origin of the problem. To read the code, you will need a diagnostic computer or an electronic scan tool.

Why does my car shake when I Shift Into Gear?

When this happens, you’ll definitely feel the car shaking at idle. When you shift into gear and drive it, you’ll likely notice a hesitation and a loss of power. Your check engine light may also come on, as the resulting incomplete combustion increases your emissions. Your spark plug wires may also be damaged, worn or improperly connected.

Is there check engine light on my car?

When I use my car it idles at 700 and then stalls when used for 5 min but there are no check engine lights. It was tuned up 2 months ago changed fuel filter and when we took it out a lot of air came out instead of gas. We changed the fuel pump right after and cleaned the engine with seafoam. And it still stalls.

Why does my car shake all the time?

Vibration or shaking may be caused by misfires, poor fuel pressure, or faulty spark plugs. You should also know that a defective idle air control valve might make the engine idle drop significantly. This may cause the motor to vibrate or shake abnormally.

When does the Kia check engine light turn off?

Kia Check Engine Light (CEL) (also known as Service Engine Soon SES or MIL) should not stay on when you are driving. The Check Engine Light should stay on when you turn the ignition to ON position, and until you start the engine, the light should turn off.

Why does my Kia Soul engine keep vibrating?

Given the range of the severity of potential issues, from faulty spark plugs to weak motor mounts, it’s important to have a mechanic provide a thorough inspection as soon as possible. Real customer reviews from Kia owners like you. How can we help?

Why does my Kia Sedona have a check engine light?

Kia Check Engine Light (CEL) (also known as Service Engine Soon SES or MIL) may sometimes turn on and stay on when driving. This problem can effect Kia models such as: Sedona and other models.

What are the names of the Kia warning lights?

They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray). There are nearly 70 of them, so search carefully! Models examined include Cadenza, Carnival, Forte, K5, K900, Niro, Optima, Rio, Sedona, Seltos, Sorento, Soul, Sportage, Stinger and Telluride.

What’s the red light on the Kia tachometer?

There is a red light that always flashes on the tachometer when the engine is switched off.

What does the Check Engine light on a Kia Spectra mean?

The check engine light on your 2000-to-2009 Kia Spectra is alerting you that trouble codes have been stored in the onboard computer’s memory bank. These trouble codes could be related to a failure in the engine control system, driveline control system, body control system or emissions system.

What do the dashboard warning lights on your Kia vehicle Mean?

Some of the most important dashboard warning lights found on a Kia vehicle include: Anti-Lock Brake System (ABS) Warning Light Indicates a malfunction in the Anti-Lock Brake System Electronic Brake Force Distribution (EBD) System Warning Light

Why does my check engine light keep coming on?

The only way to know the reason behind the check engine light is to read the trouble codes stored in the onboard computer. These codes are designed to help mechanics diagnose and troubleshoot any problems your Spectra may have. If you’re not having any performance issues with your Spectra, a common cause is a loose gas cap.

What are the codes for Kia check engine light codes?

P1633Battery Overcharge P1634Alternator “B” Open (1.8L) P1655Unused Power Stage ‘B’ P1660Power Stage Group ‘B’ P1665Power Stage Group ‘A’ P1693MIL Circuit Malfunction P1743Torque Converter Clutch Solenoid Valve Open Or Short

Why is my Check Engine light on and off intermittently?

If you have a check engine light on and off intermittently, you probably don’t have to worry about any of the problems that we just mentioned. Those issues are all typically going to keep your check engine light on for the long haul.

What does a faulty check engine light mean?

It helps monitor how much fuel is burned. A faulty sensor means it’s not providing the right data to the computer and causes a decrease in gas mileage. Most cars have between two and four oxygen sensors; the code you get from the scanner will tell you which one needs replacing.

Why is my Kia Sorento engine not cranking?

This is a new $5,000 engine with only 20,000 miles due to a crankshaft pulley break ruining the original one. Now, it won’t crank, obdii returns codes P0763 and P0101 which are shift solenoid and mass air flow electrical.

How can you tell if your car engine is idle?

You can often also feel the strange vibrations inside your car while sitting in the driver seat. However, modern cars do often have great engine mounts, and you do sometimes have to open the hood to check if the engine is vibrating or even jumping on idle.

When does the Check Engine light come on?

The Check Engine Light should stay on when you turn the ignition to ON position and until you start the engine, after that the light should turn off. If the light continues to stay on, that means there is a problem and you need to get your car diagnosed.

How can I Reset my Check Engine light?

The simplest way to reset the check engine light yourself is to use the OBD-II scanner. You can use an inexpensive scanner such as the Autel MaxiScan OBD2 Scan Tool which is a handheld unit or an ELM327 Bluetooth Adapter and your phone. The scan tool plugs into the OBD-II port located underneath the steering wheel.

How to test Acura check engine light codes?

Next, read our article Automotive Circuit Testing 101, and if there is an article related to the system you are testing, such as Oxygen Sensors or EGR concerns, read these as well. They will provide valuable info! If there is a link to a specific diagnosis strategy for the code then follow that and start testing.

Where can I Reset my Kia engine light?

If you don’t, you can easily drop in to Horne Kia’s service department and have us reset your engine light for you while you wait. Our Horne Kia dealership is just a short drive from Phoenix, Chandler, Tempe, and anywhere in the Greater Pheonix Area. Ok.

When to call a tow truck for a Kia?

When it is safe, pull over and call a tow truck, have your vehicle taken to the nearest Kia-certified service center. Failure to heed this warning could lead to your engine experiencing catastrophic failure.

Is the Kia Sorento a safe car to drive?

Lucky for all Kia drivers, the on-board diagnostics and repair systems are getting better and better every year. The 2019 Kia Sorento, for instance, features a number of important features that make driving safer than ever. How Bad is the Check Engine Light on Kia Cars?

What does the maintenance required light mean on a Kia?

The maintenance required light is simply indicating that the car is due for an oil change or other routine servicing. Your Check Engine light will either be orange, yellow, or red, depending on the manufacturer, and it will either be the words ‘CHECK ENGINE’ or it will be shaped as an engine.

When does the Check Engine light come on on a Kia Sorento?

Intermittent Check Engine Light: If the check engine light on your 2012 Sorento is intermittent, try to take note of the conditions when this happens. For example, does it happen when you accelerating, driving on the highway or does it appear at low speeds? This will help your mechanic evaluate the issue.

How can I reset the Check Engine light on my Kia?

Write down all the codes that are Present or Current. Fix all problems that trigger these fault codes. Go back to the menu and select Fault Fault Codes. This will reset the check engine light on you, Kia. Can’t reset the check engine light? First, you need to fix all the underlying problems that triggered the fault codes.

Are there any safety issues with a Kia?

It is important to be aware of some of the common safety issues many individuals are facing with their Kia vehicles as many of them are engine problems. Engine Stalling: Kia recently announced that more than 100,000 Kia vehicles worldwide are at risk of engine stalling.

What to do if your Kia engine stops working?

If you start to experience Kia engine problems, you could be facing some very costly repairs. If your engine stops working, your car will shut down. If you notice your Kia is running differently than normal, you always go get it checked out by a mechanic.

Why are there so many recalls on Kia cars?

Another reason Kia vehicle owners are very frustrated is that Kia has been downplaying this recall. Large issues occur when your engine fires and overheats. This is nothing to take lightly and it is very dangerous to drive a car with engine problems like this.

Where to find check engine light code on Kia?

When retrieving Kia check engine light codes with an OBD II scan tool, proceed as follows: 1. Connect scan tool to the 16-pin data link connector (DLC) located underneath the steering column. The connector may have a removable cover. 2. Turn the ignition on. 3.

Why does my check engine light not turn off?

Sometimes your check engine light won’t turn off even after you’ve fixed the problem with your vehicle. When that happens, you’ll need to manually reset the light. One option is to turn the ignition on and off 3 times in a row. Then, drive your vehicle around and check to see if the light goes off.

Is it illegal to reset a check engine light?

Reputable auto shops will not reset a check engine light if the problem is not fixed. To do so would be illegal. This would only be acceptable if it is cleared to complete a diagnostic process to identify a problem. Check engine light being on is a sign that there is a problem with the car.

Why is my Check Engine light on in my Bugatti Chiron?

The monstrous Bugatti Chiron has 16. No matter how many you have though, a malfunctioning coil will almost certainly trigger the check engine light, but remember, if your car burns diesel, you have neither ignition coils nor spark plugs.

Why does my check engine light keep turning on?

The ECU stores a diagnostic trouble code (DTC) in its memory, triggering your check engine light to turn on the dashboard. Any number of things can cause this problem – it may be as simple as a loose gas cap, a problem with an incorrect fuel/air mixture, or something much more severe as an engine problem.

What does malfunction indicator light on Kia Sportage mean?

Kia Sportage: Malfunction Indicator Light (MIL) (check engine light) This indicator light is part of the Engine Control System which monitors various emission control system components. If this light illuminates while driving, it indicates that a potential malfunction has been detected somewhere in the emission control system.

What are the features of the Kia Sportage?

State-of-the-art LED headlights help improve driving visibility. LEDs on the inside of each headlight accent the front view of your Sportage. High Beam Assist (HBA) can detect approaching vehicles and will automatically dim your headlights from high to low beam.

How does High Beam Assist work on a Kia Sportage?

LEDs on the inside of each headlight accent the front view of your Sportage. High Beam Assist (HBA) can detect approaching vehicles and will automatically dim your headlights from high to low beam. Image shown for illustration only. High Beam Assist (HBA) does not operate below certain speeds, or in some lighting and driving conditions.

What happens if the Mil illuminates on Kia Forte?

If the Malfunction Indicator Lamp (MIL) illuminates, potential catalytic converter damage is possible which could result in loss of engine power. In this case, have your vehicle inspected by an authorized Kia dealer as soon as possible.

What should I do if my Kia Soul has a warning light?

1. Drive carefully to the nearest safe location and stop your vehicle. 2. Turn the engine off and check the engine oil level . If the level is low, add oil as required. If the warning light remains on after adding oil or if oil is not available, have your vehicle inspected by an authorized Kia dealer as soon as possible.

When does the Kia malfunction indicator light illuminate?

In this case, have your vehicle inspected by an authorized Kia dealer as soon as possible. This warning light illuminates: Once you set the ignition switch or Engine Start/Stop Button to the ON position. – It remains on until the engine is started.

Why are the spark plugs on my Kia not working?

Spark plugs ignite the fuel/air mixture in the combustion chamber of your vehicle. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If you don’t replace it you will experience poor performance and reduced fuel economy and worn plugs can cause a clogged catalytic converter or damage to ignition coils and O2 sensors.

What does the Check Engine light on my spectra mean?

The check engine light is alerting you of a fault in one of these systems, but the fault may not have a direct effect on engine performance or operation. What Could that Light Mean? The onboard computer in your Spectra monitors every sensor, and sets a trouble code for any reading that is out of specification.

What are the signs of a bad transmission on a Kia?

If you hear or feel grinding or shaking, that’s definitely not good. It could also be a sign of a bad clutch if you have a manual transmission. Nevertheless, bring your car right away if you notice this. Schedule a test drive of one of our Kia models. 3.) Buzzing and clunking A common indication of transmission trouble is unusual noise.

When does the check transmission light come on?

As of 2012, most new vehicles have a warning light that lets you know of transmission problems before they become a major expense.

What causes the Check Engine light to come on?

Many are related to the transmission. Your mechanic can perform a computer analysis that will reveal the problems that can be causing the Check Engine Light to come on in the form of alphanumeric codes known as P codes. The following are among the most common P codes: Your transmission is overheating.

What is the code for the Check Engine light?

Again, this is an informational code. With most vehicles, the TCM is the only computer that can turn on the check engine light. If there’s a problem preventing the light from coming on, you’ll see this code. The transmission range sensor tells the TCM the position of the gear lever.

What does a malfunction indicator light mean in a car?

The Malfunction Indicator Light can signal three different types of problems. Occasional flashes indicate temporary engine malfunctions. In this case, it is good to be aware of the possible forthcoming issues which can later on turn to more serious ones. The most common case is when the indicator light stays on constantly.

What to do when malfunction indicator light illuminates?

If you have a OBD-II scantool (for example one with ELM327 chip) and OBD diagnostic software, you can check the reason for the problem yourself. For example, our car diagnostic software can read the DTC code from the car and give you description of the code. Those will guide you towards the main cause of the problem.

Where to find diagnostic trouble codes on Kia?

Failures of each input and output device are indicated and retrieved from the engine control module (ECM) as diagnostic trouble codes. Locate DLC at top center of firewall and use jumper wire to connect ENG.

What does the malfunction indicator light on a Hyundai Elantra mean?

This indicator light is part of the Engine Control System which monitors various emission control system components. If this light illuminates while driving, it indicates that a potential malfunction has been detected somewhere in the emission control system.

How to fix Kia Rio check engine light?

Actions: removed MAF Sensor cleaned with MAF cleaner crc , cleaned throttle body, removed IAC Sensor cleaned with throttle cleaner crc brand. Inspect spark plugs all are good and gap correct. Engine performance is better and has no miss or stall.

What does it mean when your engine is too lean?

Home » Check Engine light » P0171. The OBDII trouble code P0171 – System Too Lean (Bank 1) means that the engine air-fuel mixture is too lean, or there is too much air and too little fuel. Driving a car with the code P0171 can cause more damage to the engine over time, as when the engine runs lean, the combustion temperature is higher.

What happens when the Check Engine light Pops on?

On modern vehicles, the check engine light will also pop on when there’s a misfire. When the check engine light illuminates, your car’s primary computer, which is often referred to as the powertrain control module (PCM), will store a diagnostic trouble code (DTC) in its memory.

What causes the Check Engine light to illuminate?

Engine surging will cause the Check Engine Light to illuminate. (Photo Source: rd) Whatever the cause, if your car’s engine is misfiring or surging, your OBD-II Diagnostics system will show error codes and the Check Engine Light will glow on your dashboard.

When do Kia Sorento engines hesitate during acceleration?

Kia Sorento Engine hesitates during acceleration Inspection at your home or office. Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM. Our certified mobile mechanics can come to you now.

Why does my Kia Rio not turn over?

When starting the car,it would crank,but not turn over (50% of the time),and when it does start,it drives fine,but this past week, the battery light and oil light came on,and the car was at the stop light,and wouldn’t move,while everythingelse was functioning (radio,ac,etc),so I put it in park ,and turned the key,it cranked right up.

What causes the Check Engine light to turn on?

So I assumed it was the oil causing the light to turn on. Since filling the oil up the light hasn’t turned back off, after driving for another 40 mins I pulled over again and restrained checked. Any suggestions on what else to check? Or is there a reset for the engine check light?

What causes a check engine light on a Kia Rio?

You should check the crankshaft and camshaft sensors, as well as the MAF, IAC, and TPS valves and each of the fuses. Hello, finally I solved the problem. It was a damaged fuse together with the camshaft sensor, which was out of order. I changed both things and the problem disappeared. My 2009 kia rio is acting up.

What does a flashing check engine light mean?

A flashing check engine light is your Kia Rio’s way of saying “I have a serious problem, don’t ignore me”. Most of the time, that serious problem is a misfire. This flashing light should not be ignored. When your engine is misfiring, it is dumping raw fuel into the exhaust.

Navigation