How to repair power window switch on Kia Sportage?
1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim and power window switch. 3. Check for continuity between the terminals in each switch position according to the table. If the continuity condition is not normal, replace the switch. 1. Disconnect the negative (-) battery terminal. 2.
How do you remove a power window switch?
Using a flat tip screwdriver, slightly pry up all around the switch base or cluster. Pop out the switch base or cluster and remove the harness from the switch. Step 6: Pry out the locking tabs. Using a small pocket flat tip screwdriver, slightly pry on the locking tabs on the power window switch. Pull out the switch from the base or cluster.
Is there a cut out switch on the driver door?
There is also a cut out switch, or a window lock switch, that allows only the driver door to activate the other windows. This is a good idea for small children or animals who may accidentally fall out of a moving vehicle. The window switch on the driver door is usually combined with the door locks. This is called the switch panel or cluster panel.
What is fail safe cooling on Kia Sportage?
Special Service Tools Tool (Number and Name)IllustrationApplicationRKE Battery Checker (09954-2P100)Measuring the RKE batteryvoltage Fail-safe cooling allows you to temporarily drive your vehicle before any incremental component damage occurs. The fail-safe distance depends on ambient temperature, vehicle load and terrain.
1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim and power window switch. 3. Check for continuity between the terminals in each switch position according to the table. If the continuity condition is not normal, replace the switch. 1. Disconnect the negative (-) battery terminal. 2.
How to remove interior trim from Kia Sportage?
Gently pry out the plastic trim panel behind the door opener handle with a small flathead screwdriver. Set the panel aside in a safe place. Pry open the square screw cover at the bottom of the door pull well in the center of the armrest with a small flathead screwdriver.
How do you remove a Kia door panel?
Insert a large flathead screwdriver or an automotive panel removal tool in to the notch cut out on the bottom edge of the door panel. Firmly pull out the pop rivet friction fasteners along the bottom edge of the door panel. Continue pulling out the pop rivets on the bottom edge and both sides of the door panel.
Special Service Tools Tool (Number and Name)IllustrationApplicationRKE Battery Checker (09954-2P100)Measuring the RKE batteryvoltage Fail-safe cooling allows you to temporarily drive your vehicle before any incremental component damage occurs. The fail-safe distance depends on ambient temperature, vehicle load and terrain.