What is code P1326 Kia Optima?
|P1326 KIA Meaning The Knock Sensor Detection System (KSDS) detects vibrations indicating the onset of excessive connecting rod bearing wear. It is designed to alert the driver at an early stage of bearing wear before the occurrence of severe engine damage, including engine failure.
How do you reset the check engine light on a 2016 Kia Optima?
How Do You Reset Your Check Engine Light?
- Turn off your ignition.
- Don some safety glasses and gloves.
- Locate the negative terminal.
- Loosen the negative terminal’s nut with a wrench, then pull the connector from the battery, keeping it to the side for 30 to 60 seconds.
- Reconnect the cable and tighten with your wrench.
What are the possible causes of a p1326 Kia?
P1326 KIA Possible Causes 1 Faulty Knock Sensor 2 Knock Sensor harness is open or shorted 3 Knock Sensor circuit poor electrical connection 4 Engine mechanical problem 5 Reprogram Engine Control Module (ECM)
What does DTC code p1326 mean on Hyundai?
At that time, Diagnostic Trouble Code (DTC) P1326, specific to the KSDS, will be recorded in the ECU. The vehicle can continue to be operated for a limited time in Limp Home Mode, but it will accelerate slowly and have a reduced maximum speed. Also, engine RPMs will be limited to approximately 1800-2000 RPM.
What does the knock sensor on a Kia mean?
P1326 KIA Meaning The Knock Sensor Detection System (KSDS) detects vibrations indicating the onset of excessive connecting rod bearing wear. It is designed to alert the driver at an early stage of bearing wear before the occurrence of severe engine damage, including engine failure.
P1326 KIA Possible Causes 1 Faulty Knock Sensor 2 Knock Sensor harness is open or shorted 3 Knock Sensor circuit poor electrical connection 4 Engine mechanical problem 5 Reprogram Engine Control Module (ECM)
What does a check engine light mean on a Kia Optima?
A flashing check engine light is your Kia Optima’s way of saying “I have a serious problem, don’t ignore me”. Most of the time, that serious problem is a misfire. This flashing light should not be ignored. When your engine is misfiring, it is dumping raw fuel into the exhaust.
At that time, Diagnostic Trouble Code (DTC) P1326, specific to the KSDS, will be recorded in the ECU. The vehicle can continue to be operated for a limited time in Limp Home Mode, but it will accelerate slowly and have a reduced maximum speed. Also, engine RPMs will be limited to approximately 1800-2000 RPM.
What are the codes for Kia check engine light codes?
P1633Battery Overcharge P1634Alternator “B” Open (1.8L) P1655Unused Power Stage ‘B’ P1660Power Stage Group ‘B’ P1665Power Stage Group ‘A’ P1693MIL Circuit Malfunction P1743Torque Converter Clutch Solenoid Valve Open Or Short