How do you reset a Kia battery after it is disconnected?

Connect the other end of the jumper wire to the positive terminal on the battery. Enter your Kia and place the key in the ignition, turning it as far as it will go without starting the engine. Push the lock button on your key fob for three seconds, until the lights on your dashboard blink.

How do you turn off the engine on a Kia?

Open the cover on the diagnostics port and connect a jumper wire to the connector inside the port marked “6.” Connect the other end of the jumper wire to the positive terminal on the battery. Enter your Kia and place the key in the ignition, turning it as far as it will go without starting the engine.

Is there a safety recall on the Kia Sportage?

The car was inspected by a Kia dealership and metal particles were found in the sump pan. These particles had damaged the engine internals causing critical failure. $21,000 quoted to replace the engine! I researched this car. Many overseas markets have this car on safety recall.

How is customer service at Kia Motors Australia?

The service I have received from [Name Removed], Kia Motors Australia, Customer Service Manager is absolutely appalling and at a level I believed was left behind in the 1980’s before car manufacturers understood the importance of customer satisfaction and retention. Kia told me that Australian bound vehicles were not faulty only overseas vehicles.

Why does my 2012 Kia Rio not start?

There are a number of issues that can go wrong with starting system and make your 2012 Kia Rio car won’t start or hard time to start – This article guides you through some of the facts behind the starting system, and the components that may be to blame, and tells you what action you can take to try to remedy each situation.

Is it possible for Kia to correct itself?

Yes. I’ve had a similar experience and Kia cannot explain it. It seems to correct itself, but not always after the first time I shut off the car and re-start it. It’s happened 3 times to me so far. I have about 45K on my vehicle.

Why is the reversing camera not working on my Kia Sorento?

Yet another problem to add to my list of Sorento woes. The reversing camera system has stopped working. Put the car into reverse, there’s a beep from the speakers as usual, the rear parking sensors spring into action and work fine, the reversing lights come on

Is there a problem with the Kia Sorento?

KIA is lying to you, they have heard of it, numerous times. I have an ’06 Sorento and the same problem, sticks in 4th or 5th and won’t go into passing gear when needed, but it’s intermittent. It took them two days and a thousand miles to duplicate the problem when they had it in. There were four of us at once with the same problem.

Where is the jumper wire on a Kia?

Open the hood and locate the “Diagnostics” connector behind your Kia’s battery. Open the cover on the diagnostics port and connect a jumper wire to the connector inside the port marked “6.” Connect the other end of the jumper wire to the positive terminal on the battery.

Why does my Kia Amanti battery not start?

Kia Amanti Won’t Start Repair Symptoms. The battery is considered dead when there isn’t enough charge to start the engine or run electrical components. If the fuel pump leaks or begins making a lot of noise, get it looked at right away.

Why is my Kia Sedona not starting up?

Many times, the key is the issue, and vehicles with keyless go or push-to-start technology may function properly if the key is inserted (check owners manual for the location of the port). The newest version of the smart key can be used to press the start button, which will allow the vehicle to register the key when the battery is low.

Where can I find free Kia Amanti repair estimates?

Free Kia Amanti repair estimates Car care advice Get back on the road Find auto repair near me Troubleshoot a car problem Ask a Kia Amanti question Free Kia Amanti repair estimates Car care advice Research a car Kia Amanti overview Kia reliability ratings Common Kia Amanti problems

How does the Kia stop and go system work?

One of the newest advances in improving fuel efficiency and reducing emissions in Kia vehicles is the engine stop-start system. Simply put, the engine in your Kia will shut off when the car is idling, resulting in the desired efficiency and emissions improvements.

Why did my Kia Optima engine shut off without warning?

The vehicle’s engine stalled & shut off without warning, while I was driving in traffic. It gave zero prior warning, there were no warning lights, no sputtering, no indication of an issue. At the time, it had a quarter tank of gas (at least the gauge said so).

Why does my Kia Sorento not start in the morning?

My Kia lately is not starting in the morning, I’d did it 3 months ago too and the battery service repair man installed a new battery, afterwards the car started fine and ran very well. But now for tha past few day, almost every morning the Kia won’t start, lights come on radio works, no clicking sound or even engine attempting to start.

Why does my Kia Sportage not start in the morning?

Went to crank it up and wont start. All the lights and radio work there is a rapid clicking sound when the key is turned. Could this be the starter or is there a starter solenoid,the battery is 4yrs old. My Kia sportage will NOT run on humid mornings?

How does Kia Idle Stop and go work?

Kia has had an eye on eco-friendly technologies for a while now, which is why they introduced their ISG system (Idle Stop and Go). How exactly does Kia ISG work? Kia’s ISG system automatically shuts off the engine when the vehicle is stuck in traffic, immediately starting it again when the driver needs to move.

How to reset your car key fob after replacing the battery?

1 Turn your car’s engine off and turn the ignition to the key “run” position. 2 Press and hold the “unlock” button on your functional key fob. 3 Release both buttons simultaneously.

What to do if your Kia remote is not working?

<LI>Get into your vehicle with your key fobs. <LI>Put one key into your ignition and turn to ON position, DO NOT start your vehicle. <LI>If you just have ONE key fob to reprogram, when you turn the vehicle to ON, hold the LOCK button down for 3 seconds, the lights on the dash will go off, and you are done.

Why does my car key not work after I change the battery?

If your key does not work after you change the car battery, start the engine by pressing the START button with the keyfob. If your key does not work after changing the key fob battery, here are some possible causes. Don’t touch the key fob circuit. Avoid touching the key fob circuit with your bare hands.

Why is my key fob not working on my Dodge Ram?

The key fob will need to be reprogrammed to the vehicle as when the battery was replaced in the key fob, the key was reset. This is why nothing is working with the key fob. After replacing the battery in the key fob remote, you will need to reprogram the remote to the vehicle.

Do you have to reset your key fob after replacing the battery?

Click to see full answer. Then, do you have to reprogram key fob after changing battery? The key fob will need to be reprogrammed to the vehicle as when the battery was replaced in the key fob, the key was reset. This is why nothing is working with the key fob.

What to do if your car key remote stops working?

Here are the five things you’ll want to check first when your remote stops locking or unlocking your car doors: Verify that the remote is actually bad by using a backup remote. Check and replace the key fob battery as needed. Take the key fob apart and check for broken contacts or misaligned buttons.

What happens when you change the battery on a stop start car?

Finally, once the battery has been changed, reset the battery management system (BMS). This will be done through the on-board diagnostics port. If you skip this step, the stop/start system might not work and the battery’s operational life could be shortened or system faults could develop.

When do I need to replace the battery on my car?

The resultant expense and inconvenience is sure to be remembered by your customer. Even if the battery has obviously been replaced in the past, it’s definitely worth checking whether the original battery was an AGM/EFB type, particularly if the vehicle is registered after 2008.

What to do if your car battery won’t start?

If the replaced battery car won’t start, the first thing to check is whether you replaced the battery correctly. Are the cable clamps tight? Are the cables themselves in good shape?

Why does my Kia Soul not start up?

If your Soul’s engine won’t crank or cranks very slowly, then the most likely culprit is weak or dead 12v battery. Investigating more closely and doing a battery voltage test will clarify whether the starting problem is due to the battery.

What happens when you disconnect the battery on a Kia?

Disconnecting the battery on your Kia sometimes deprograms the keyless entry remote, the vehicle alarm and the internal computer in the vehicle. To reset each of these functions after reconnecting your Kia’s battery, you need to reprogram your keyless entry remote control, which will reset the rest of the vehicle.

What does it mean when Kia Optima won’t start?

The first and most common is when it won’t turn over. This just means that the engine doesn’t move when you turn the key. The second way that your Optima won’t start is when the engine turns when you engage the starter, but it won’t fire and run on its own.

Why is my air conditioning not working in my Kia Spectra?

Check the control panel next in your Kia Spectra. If the air conditioning controls are not working at all, then the control panel is likely to blame. Remove the trim plate surrounding the center instrument panel. Detach the electrical connectors and remove the control panel. Listen for the blower motor while the engine is running.

How long does it take to reprogram a Kia battery?

Reprogramming takes only a few minutes, and you can do it yourself without having to call a professional. Open the hood and locate the “Diagnostics” connector behind your Kia’s battery.

How do you turn off the airbag light?

The first step is to turn the ignition switch on, which will make the airbag light to come on. The light will flash for exactly seven seconds. Once it is off, you have to turn off the ignition within a second. Turn the ignition on again after three seconds.

How to fix your airbag SRS warning light?

A no cost easy way to reset and fix your airbag SRS warning light. Tsukasa Azuma is an awesome car blogger of Car From Japan. He owns a car repair shop at downtown Osaka, and he put all that experience to good use in his sharing posts.

What should I do if my Kia airbag light is not working?

You should have the vehicle towed to the nearest mechanic or dealership to have it looked at and replaced. Once you have done this, you need to reset the airbag light in order to keep the KIA’s computer functioning properly.

What does the SRS light on a Kia mean?

The airbag light on a Kia will illuminate as “SRS,” which stands for Supplemental Restraint System. Usually it doesn’t illuminate unless the vehicle has been in an accident. If it does turn on, it means there is a malfunction with the airbag system. You should have the vehicle towed to the nearest mechanic…

Where is the fuse on a Kia airbag?

Find the rectangular-shaped fuse panel cover on the lower part of the driver’s side dashboard. Open it by pulling down on it from the top. Find the largest port inside the fuse panel and check to make sure it is the same size and shape as the connector on the computerized scan tool. Plug the scan tool into this port.

Where is the SRS fuse on a Kia?

This process will also turn off the SRS light. Find the rectangular-shaped fuse panel cover on the lower part of the driver’s side dashboard. Open it by pulling down on it from the top. Find the largest port inside the fuse panel and check to make sure it is the same size and shape as the connector on the computerized scan tool.

Is there a way to reset a factory car alarm?

Utilize common tricks. Factory car alarms have some simple reset protocols to help turn off an alarm. Most of the tricks rely on using the key in the door; simply put, a lot of factory car alarms have a door sensor, so working with the door might be the go-to for a quick fix.

What kind of turn signal does Kia Amanti use?

The replacement is a used 2005 and when installed the turn signal is good but the car wont start. I changed the ignition lock cylinder in my 2004 Kia Amanti. It turns over but will not start.

How long does it take to turn off Kia theft alarm?

The horn will sound and the hazard warning lights will blink continuously for approximately 27 seconds, and repeat the horn 3 times unless the system is disarmed. To turn off the system, unlock the doors with the ignition key or transmitter (or smart key).

What causes a Kia Amanti no start diagnosis?

Difficulty starting the vehicle may be caused by a defective vehicle immobilizer (anti-theft) control module. The average cost for a Kia Amanti No Start Diagnosis is between $88 -$111. Learn More Good news!

How can I fix the alarm on my car?

Fix an alarm that starts when you turn the car on. You could need a new battery. Disable the alarm by removing the alarm fuse, and then bring the car to the shop. They can check your battery and move on from there if the problem is the alarm system. Diagnose an alarm that never sets. Lock your car electronically using the remote, if you have one.

What happens if you remove fuse from car alarm?

Doing this will not cause damage to the car, but make sure you return the fuses after you’ve determined they are not for the alarm. Some car alarms, when tampered with, prevent a car from starting as an anti-theft function. If you remove the fuse and cannot start the vehicle, you will have to take the car to a mechanic or dealer.

What should I do when I Change my Kia battery?

We recommend that you wear eye protection when replacing the battery on your Kia. Never smoke or light a fire while working near your Kia car batteries. Replace the battery in your Kia with a replacement that has the same: size, ratings, and cranking amps.

Where is the battery located on a Kia Optima?

Open the hood and locate the battery on your Kia. On Kia vehicles, the battery is located in the engine compartment. On certain Kia models such as the Optima, the air assembly goes on top of the battery. This will need to be removed. Other Kia models, such as Rio and Sedona, may not have this cover.

What kind of battery does a Kia Sorento have?

Model years 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017. The battery size can vary by model. Many Kia vehicles use Group Size H6 and 124R. For example, battery type H6 is used on 2011-2016 Kia Optima, and group size 124R is used in Kia Sorento 2010-2016.

What kind of battery does a 2015 Kia Cee have?

It’s a 2015 Pro Cee’d 1.6 CRDI 128BHP. Only issue I have had so far (and from what I’ve read it’s a common one) is that the ISG so far hadn’t worked once.. Thought I may as well bite the bullet and invested in a new battery, a Bosch S5 A08 70AH/760CCA AGM.

Why does my Kia Sportage alarm not go off?

I have a 2000 sportage Kia and recently changed the battery. Now the alarm goes off when I open it and does not go off when I put the key in the ignition. Is there a relay or reset procedure that I can do to silence the alarm? The radio does not get electrical power. Where and what should I be looking for to fix the problem?

How often does Kia Sportage battery go dead?

It goes dead at least once a week. After 3 batteries, I don’t think that’s the problem. Tonight I drove it home, had dinner, went to put it in the garage, and the battery was dead. In less than an hour. 30 seconds on the charger and it started.

Can a loose nut on a carburetor cause bad throttle?

The days of having to constantly adjust the throttle cable due to a loose nut on the carburetor are long gone. Today’s modern cars, trucks, and SUVs are all equipped with an electronic throttle control system that contains an accelerator pedal position (APP) sensor.

What happens if the throttle module has malfunctioned?

If the module has malfunctioned, the car will operate in a â€œLimp Mode.â€ This is a function that allows the car to be run at a low speed in order to move the vehicle from hazardous areas. There are other symptoms that will cause similar issues with the throttle.

Why does my Kia have no throttle response?

There is a recent TCM update for the software logic that came out on Jan 9th 2019 entitled “Acceleration Logic Improvement”. The fix has been applied to my car (2016 GT-Line DCT AWD) and I have not encountered the serious hesitation / lack of throttle response since having this applied.

Is the accelerator pedal sensor on my Amanti bad?

I have an ’05 Amanti which I’ve sent to the dealer, I’ve replace the Accelerator pedal position sensor, the throttle position sensor but the problem still persists. I did notice recently that the issue becomes worse in warmer weather.

What’s the average cost of a Kia Amanti?

The accelerator position switch may fail intermittently resulting in sluggish acceleration or lack of power. The average cost for a Kia Amanti General Diagnosis is between $88 -$111. Learn More It has never been fixed.

Navigation