What to look for in fuel system control module?
AFTER COMPLETING THE STEPS ABOVE, IF YOU FIND NO POWER AT THE FUEL SYSTEM CONTROL MODULE, AT THE DARK GREEN/WHITE WIRE, MOVE TO THE POWERTRAIN CONTROL MODULE. AT THE POWERTRAIN CONTROL MODULE, CHECK PIN 50, IN THE BLACK CONNECTOR, FOR 12 VOLTS WITH THE KEY ON, FROM THE DARK GREEN/WHITE WIRE.
How big is a GM body control module?
This computer will fit the following part numbers: 10382479 15093910 15276271 15299986 15819552 15828601 15837419 15872388 15872421 15880684 15921352 15921353 15948438 15948439 20815898 20839063 20864767 20864768 20921435 20921436 20935349 22860591 25826124 25826125 25847588 25847589 25892622 25910474 25934762 25934763 95151084
Is the GM body control module programmed to your Vin?
This listing is for part number 22860591 BCM that is programmed/flashed for your vehicle with the newest updates from gm using your vin to match your vehicle. After you purchase the BCM you will need to provide us with your vin so we can program the BCM before we ship it to you.
Where is the fpcm located on a Chevy Silverado?
The above photo shows where GM chose to locate the Silverado’s (and the identical Sierra’s) FPCM (Fuel Pressure Control Module), just above the spare tire beneath the box at the rear of the truck. Ford is equally guilty of mounting the fuel pressure control module where corrosion will eat it.
How to program a GM fuel pump control module?
After you purchase the FSCM you will need to provide us with your VIN so we can program it before we ship it to you. The following part numbers are compatible 13501024 15213110 20759945 20850907 25785013 25854536 25866052 25967325
What does the ACDelco fuel pump driver do?
ACDelco GM Original Equipment Fuel Pump Driver Modules are GM-recommended replacements for your vehicle’s original components. These modules help control the voltage delivered to your vehicle’s fuel pump, helping to regulate the fuel pump’s speed.
How to check fuel pump signal in gmflash?
1. CONNECT PIN1 (BLACK GROUND) TO PIN16 (PINK GROUND) 2. CONNECT PIN32 (RD/WH BATT + ) TO PIN47 (GY FUEL PUMP 12+) THIS WILL POWER THE PUMP TO RUN AND CHECK FOR A FAULTY FUEL PUMP. 3. NEXT, CHECK FOR FUEL PUMP SIGNAL AT THE FUEL SYSTEM CONTROL MODULE. 4. FIND THE DARK GREEN/WHITE WIRE IN PIN13.
How to diagnose a faulty fuel system control module?
AT THE BOTTOM OF THIS PAGE, YOU WILL FIND THE YOUTUBE VIDEO FOR THIS PROCEDURE. YOU WILL ALSO FIND THE PIN OUT DIAGRAM FOR THE FUEL SYSTEM CONTROL MODULE FOUND ON 2007 AND NEWER GM VEHICLES. PLEASE REFERENCE THE DIAGRAM TO HELP PROPERLY DIAGNOSE A FAULTY FUEL SYSTEM CONTROL MODULE. 1. CONNECT PIN1 (BLACK GROUND) TO PIN16 (PINK GROUND) 2.