How much does it cost to replace a blower motor resistor?
The blower motor resistor or control module replacement is not very expensive. For example, one of our colleagues had a problem with his 2011 Ford Escape: the fan only worked at the speed 4. He paid $50 to diagnose and $112 to replace the resistor at a local Ford dealership.
What are the symptoms of a failed blower motor resistor?
Blower motor resistor problems. Problems with a blower motor resistor are common in many cars. The most common symptom of a failed blower motor resistor is when the heater fan only runs at high speed and doesn’t work at low speeds.
How is the speed of the blower motor controlled?
The electronic module that controls the speed of the blower motor is called a blower motor control module. In some cars, the blower motor has only 4 or 5 fixed speeds. In this case, the speed of the blower motor is controlled by a blower motor resistor.
Where does the power transistor go in a blower motor?
The power transistor has 4 wires: two come from the climate control system control unit, one is the ground, one goes to the negative terminal of the blower motor. The service manual advises measuring the voltage at the blower motor, then if not OK, at the power transistor and so on.
The average cost for blower motor resistor replacement is between $114 and $125. Labor costs are estimated between $44 and $55 while parts are priced at $70. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location.
Can a failed motor resistor cause a blower to stop?
In fact, even the diagnosis of a failed blower motor resistance is actually simple and requires no special skills or even basic knowledge, as the resistor serves only one purpose – to limit the blower to different speed settings. A failed blower motor resistor will usually cause symptoms that can be easily identified.
How to test the blower motor resistor ( 1988-1993 pickup )?
CASE 2: All circuits tested had continuity where indicated in the test steps. This is good and is the correct and expected test result that tells you that the blower motor resistor is OK and not the cause of the blower motor speed problem. If your pickup’s blower motor resistor passed this continuity test, you can stop here.
Where is the heater blower motor resistor located?
The heater blower motor resistor is located underneath the dashboard in the heater/AC compartment. The resistor enables the heater blower motor to change the speed of the fan. Without this part you will not be able to change the speed of the airflow from the blower motor. It is also possible that the heater motor blower may not work at all.
Total cost of repairs – $214 As we can see, the blower motor resistor costs between $150 and $400 and can usually be completed in about an hour to an hour and a half. These repairs are fairly simple and usually on the cheaper side for most common vehicles.
Where is the blower motor resistor complete kit located?
This COMPLETE KIT includes the Blower Motor Resistor, New Wire Harness, Wire Harness Connectors, Screws, & Washer. The AC Blower Motor Resistor is located on lower passenger side dash and is easily accessible by removing a few screws.
Where can I buy Mercedes blower motor resistors?
Get affordable Mercedes blower motor resistors you deserve. In just 10 minutes, you could save up to 80% with PartsGeek. Save time and dollars on your next replacement blower motor resistors purchase. Over 12 Years of saving people money and providing great customer service. Check our low-cost options today.
What causes a blower motor resistor to wear out?
Blower motor resistors are a small component that is forced to take on a lot of heat and current flow which can make them wear out rather quickly. This is not usually a fault of the driver of the vehicle.
The blower motor resistor or control module replacement is not very expensive. For example, one of our colleagues had a problem with his 2011 Ford Escape: the fan only worked at the speed 4. He paid $50 to diagnose and $112 to replace the resistor at a local Ford dealership.
Blower motor resistor problems. Problems with a blower motor resistor are common in many cars. The most common symptom of a failed blower motor resistor is when the heater fan only runs at high speed and doesn’t work at low speeds.
What happens when a heater motor resistor fails?
If the resistor shorts or fails, it may cause the blower motor to remain stuck on one fan speed. The heating and air conditioning systems may still function at one speed, however the resistor will have to be replaced in order for full functionality to be restored. 2. Blower motor does not work on certain settings
Why does my Dakota blower resistor keep going bad?
When your Dakota or Durango left the factory, it had a Mopar motor and voltage resister that were compatible with each other. After 10-15 years the motor wears out , begins to draws more amps burns up the resister. Most people replace the wiring harness and the resister with. cheap replacement from Autozone / Advanced etc.
What kind of resistor does a blower fan use?
The newer style of blower resistor uses electronics to send small pulses to the blower motor and based on how frequent the pulses are can speed up and slow down the blower fan. Blower motors can be fairly cheap if they are a manual resistor block style.
When do I need to replace my blower motor?
However, a weak blower motor can place an excess load on the controller. If there are any signs of a failing blower motor (such as noisy operation or a slow turning blower), it should be replaced as soon as possible to prevent burning out the speed controller by drawing excess current through it.
Why does my blower only work on high speed?
On an older style HVAC system with manual controls, the most common symptom of a failed blower motor resistor is that the blower only works on high speed. This is because if the resistor overheats and melts on the resistors in the block, it will cause the blower resistor to open.
Where does the power go in a blower motor?
For each higher speed, power flows through one less resistor. Some car makers run blower motor power through the fan speed switch first, then through the blower motor resistor and then to the blower motor and ground. Other car makers reverse that and run power to the blower motor first and terminate ground at the blower fan speed switch.
How to test Honda Accord blower motor resistor?
Testing Honda power transistor (blower motor control module). For example, in the 2009 Honda Accord, the service manual describes the procedure as follows: Turn the ignition to ON. Press and hold the OFF button and within 10 seconds press and release the Window Defogger button five times.
What does the blower motor resistor do in a car?
The blower motor resistor is an electrical component that is a part of the vehicle’s heating and air conditioning system. It is responsible for controlling the blower motor’s fan speed. When fan speed is changed via the knob on the instrument cluster, the blower motor resistor changes setting, which changes the speed of the blower motor.
What are the symptoms of a bad heater motor resistor?
Symptoms of a Bad or Failing Heater Blower Motor Resistor. 1 1. Blower motor stuck on one speed. A common symptom of a faulty blower motor resistor is a blower motor that is stuck on one setting. The blower 2 2. Blower motor does not work on certain settings. 3 3. No air from the vehicle’s vents.
What does it mean if your blower motor is not working?
Average rating from 849 customers who received a AC is not working Inspection. The blower motor resistor is an electrical component that is a part of the vehicle’s heating and air conditioning system. It is responsible for controlling the blower motor’s fan speed.