How do you reset the 2014 Jeep Grand Cherokee?
Hold temp up and down buttons to access engineering menu. This will wipe all of your personal settings and take it back to factory default.
What’s the outside temp on my Jeep Grand Cherokee?
This is interesting – the outside air temp sensor on my 2014 Grand Cherokee Limited seems to be malfunctioning. This thread has observed high temps. Mine is fixed low and eventually eases up after 10 minutes or more. Example. Today, it insisted that it was 42 degrees out. It was 26 degrees warmer (68).
Where is the reset button on a Jeep Grand Cherokee?
In extreme cases, hard codes are generated, which can only be cleared with a proper scan tool, or by resetting the computer. Connect the scan tool’s data cable to the data link connector (DLC) port. In most Jeeps, the DLC port is located next to the fuse panel under the driver’s side dash.
What to do if your Jeep Grand Cherokee wont start?
There are certain emissions-related codes that may require a Chrysler/Jeep dealership to inspect and clear. Disconnect the scan tool from the DTC port when done. If you do not have a quality scan tool, refer to Step 3. Disconnect the negative battery cable and leave it disconnected overnight.
Why is the temperature sensor on my Jeep not working?
To add to the problem, the remote start comfort features aren’t working because the temperature sensor reads 10-15 degrees warmer than it really is. I have given it ten minutes to adjust the temperature several times with no luck.
This is interesting – the outside air temp sensor on my 2014 Grand Cherokee Limited seems to be malfunctioning. This thread has observed high temps. Mine is fixed low and eventually eases up after 10 minutes or more. Example. Today, it insisted that it was 42 degrees out. It was 26 degrees warmer (68).
In extreme cases, hard codes are generated, which can only be cleared with a proper scan tool, or by resetting the computer. Connect the scan tool’s data cable to the data link connector (DLC) port. In most Jeeps, the DLC port is located next to the fuse panel under the driver’s side dash.
There are certain emissions-related codes that may require a Chrysler/Jeep dealership to inspect and clear. Disconnect the scan tool from the DTC port when done. If you do not have a quality scan tool, refer to Step 3. Disconnect the negative battery cable and leave it disconnected overnight.
To add to the problem, the remote start comfort features aren’t working because the temperature sensor reads 10-15 degrees warmer than it really is. I have given it ten minutes to adjust the temperature several times with no luck.