How to install a wire harness for an injector?
PAGE # SECTION FIG. # 16 INJECTORS 2, 4, 6, & 8 18 18 PARK/NEUTRAL POSITION SWITCH 19 19 VSS SENSOR (4L60E) 20 19 VSS & INPUT SPEED SENSOR, TRANSMISSION 21 CONNECTION (4L80E) 19 4L60E/65E TRANSMISSION CONNECTION 22 20 TRANSMISSION CONNECTOR PIN-OUT 23 22 NOID LIGHT 24 5 INTRODUCTION
What was the problem with my Smart Fortwo radio?
AM band on radio would periodically become unlistenable because of high levels od static-like noise. The problem turned out to be a defective pre-amp and/or its connections, which was replaced under warranty. Replaced steering angle sensor in steering wheel to restore horn function.
What’s the problem with my Smart Fortwo motion sensor?
First trip in (May) the dealer diagnosed a faulty interior motion sensor. Parts kept not arriving, so after 10 days, they disabled the motion sensor and I picked up the car. Part arrived this month and was installed. replace defective interior motion sensor for alarm (was causing random and frequent false alarms)
Which is the easiest fuel injection harness to install?
You have purchased what we at Painless Performance Products believe to be the most up-to-date and easiest-to-install automotive fuel injection harness on the market. It is designed for easy installation, even if you have no electrical experience.
What kind of wire is a fuel injector?
For mine the middle orange/black wire was the sense wire, the black/blue wire was ground, and the dark purple/white wire was the reference voltage. Then it was just a matter of stripping the wires, removing the old connector from the harness and soldering the new connector in place.
How many pins are on the harness and fuel injector?
The White (7 pin) connector wasn’t detailed on Josh’s diagram, as it seemed to just connected to standard engine connections. However, for some reason he’d relocated all but one of the pins to different parts of the connector. I found it much easier to remove the male pins on the other side of the harness to make the connectors match.