Do you need a torque wrench for throttle body?
You don’t need a torque wrench, they only get so tight. . . Most people go by feel, if you’re going to use a torque wrench use a inch-pound wrench.
Why is torque important for Bolts?
Torque is used to create tension. Bolts are used to affix two components so that they can resist tensile (pulling apart) and shearing (sliding apart) forces. After the nut has been turned onto the bolt, additional torque causes the nut to turn and stretch the bolt.
What does it mean to torque the bolts?
Torque or as also referred to as torque loading is the rotational equivalent of a linear force. In simpler terms, the application of force that acts at a radial distance which causes rotation. Essentially it is a twisting force measured force multiplied by its distance.
How much torque do you need to tighten screws?
You should tighten the bolts or screws in a part to about half of the torque spec first. For example, if the final torque should be 100 foot-pounds, then tighten to 50 foot-pounds first, and then repeat the process until you’ve tightened to 100 foot-pounds.
What are the torque specifications for a 4.6L V8?
Modular OHC Cap Bolts 22 FtLbs + 90deg Type: Bolt 22 264 29.83 Modular OHC Cap Bolts (Tighten 1st) 22 FtLbs + 90deg Type: Bolt 7.5 90 10.17 Modular OHC Jack Screws (Tighten 2nd) Step 4; 7.5 Type: Screw 16 192 21.69 Modular OHC Side Bolts (Tighten 3rd) Step 7; 16 FtLbs Type: Bolt Cylinder Head To Engine Block 30 360 40.67
Why do I have torque on my Honda Civic?
An easy way to do accidental damage is to over torque or under torque bolts and screws. Manufacturers design bolts and screws to “stretch” when they’re install. That way, the bolt and screw threads firmly attach to the matching threaded hole or nut.
Do you use a torque wrench when reinstalling bolts?
Most parts come with bolt-tightening torque specs, and your owner’s manual should have this information too. Instead of flipping through your manual to find this information, here is torque information about parts that even novice DIYers should know. Always use a torque wrench when reinstalling bolts.