Can a patriot brake be used without a controller?
Using the Velcro provided, attach one side to the desired mount- ing point, and the other side to the controller. Note: The Patriot® Brake can be used with or without the RF controller. We recommend using the controller for the operational feedback, but the brake can be set without the RF controller. Patriot®Braking System
Can a patriot 3 brake work on a Honda Fit?
Automatically checks brake pressure during setup *Please note: Due to the floorpan configuration on the driver’s side of the Honda Fit, the Patriot 3 will not work with this vehicle.
How does the Patriot brake system work on a blue ox?
1. Open the driver side door of the towed vehicle and push the driver seat back as far as possible. 2. ®Place the Patriot unit on the floor. 3. Open the brake claw and place it on the brake pedal. (Figure 1) Reference page 6 for claw operating instructions 4. The feet can be attached and adjusted for proper height position for uneven floorboards.
How do I set up my brake system?
With the brake plugged in but powered off, hold down the SET-UP button while powering on the unit. Once it lights up you can release the set-up button. 2. Once it is finished initializing, the screen will read “MODE: FORCE”. Hit the JOG switch to the left so that the screen now reads “MODE: POSITION”. Press SET-UP to select this setting. 3.
Using the Velcro provided, attach one side to the desired mount- ing point, and the other side to the controller. Note: The Patriot® Brake can be used with or without the RF controller. We recommend using the controller for the operational feedback, but the brake can be set without the RF controller. Patriot®Braking System
Automatically checks brake pressure during setup *Please note: Due to the floorpan configuration on the driver’s side of the Honda Fit, the Patriot 3 will not work with this vehicle.
1. Open the driver side door of the towed vehicle and push the driver seat back as far as possible. 2. ®Place the Patriot unit on the floor. 3. Open the brake claw and place it on the brake pedal. (Figure 1) Reference page 6 for claw operating instructions 4. The feet can be attached and adjusted for proper height position for uneven floorboards.
How do you mount a brake controller to the dash?
Using the screws provided, install the mounting bracket into the dash. Make sure you avoid drilling through components on the other side of the dash. Secure the brake controller into the mounting bracket. The four wires on the brake controller will be connected shortly. 1.