How much coolant does a 2008 Jeep Grand Cherokee take?
2008 Jeep Grand Cherokee Third generation
| 3.0 CRD 4×4 with diesel V6 3.0 L 208 HP engine (2006.5–2010.12) | 14.05 US qt. 11.7 UK qt. 13.3 L |
|---|---|
| 6.1 SRT8 4×4 with gasoline V8 6.1 L 420 HP engine (2006.3–2010.12) | 14.79 US qt. 12.32 UK qt. 14 L |
| All other modifications | 14.48 US qt. 12.05 UK qt. 13.7 L |
| Cooling fluid: MS-9769 |
What coolant does a 2008 Jeep Grand Cherokee take?
Antifreeze/Coolant Prestone 1 Gallon Yellow 50/50 Coolant/Antifreeze.
What kind of coolant does a Jeep Grand Cherokee use?
Adding engine coolant (also known as antifreeze) to your 2012 Jeep Grand Cherokee is pretty easy. Engine coolant circulates through your engine to keep it cool in the summer but won’t freeze in the winter. Make sure to check your engine when it is cold for an accurate reading.
What was the coolant leak in my Jeep?
It has been always been serviced by Jeep and has 70,000km on the clock. So while on a trip recently I experienced a coolant leak from the rear of the engine. The car was towed back to Jeep for repair. Long story short I was told that it was the hoses at the back of the engine and to replace them the engine had to come out.
How to add coolant to a Jeep Liberty?
Be sure to check your owners manual to determine the correct type of fluid to add – for Jeeps, it will typically be in a section titled Fluid Capacities in the back of your manual. Mix the coolant with distilled water so that you have a combination of 50% coolant and 50% water.
How often should I change engine coolant on a Mercedes?
The interval is every 30,000 miles on some Mercedes-Benz models with some engines, but on others it’s 120,000 miles or 12 years. On still other Mercedes, it’s 150,000 miles or 15 years.
Adding engine coolant (also known as antifreeze) to your 2012 Jeep Grand Cherokee is pretty easy. Engine coolant circulates through your engine to keep it cool in the summer but won’t freeze in the winter. Make sure to check your engine when it is cold for an accurate reading.
How to get coolant out of Jeep Wrangler?
Getting Started – Prepare for the repair 2. Overview – How to determine cooling system type 3. Open the Hood – How to pop the hood and prop it open 4. Find Reservoir – Locate the coolant reservoir and clean it 5. Drain Reservoir – Remove coolant from the reservoir 6. Radiator Cap – Remove the radiator cap before draining 7.
Be sure to check your owners manual to determine the correct type of fluid to add – for Jeeps, it will typically be in a section titled Fluid Capacities in the back of your manual. Mix the coolant with distilled water so that you have a combination of 50% coolant and 50% water.
How much does it cost to replace oil in coolant?
Initial cost estimate was $2k. Now the dealership is saying that the oil was in the coolant for so long that the radiator and the heater core need to be replaced. They are also saying that all of the rubber hoses on the engine need to be replaced due to deterioration from oil.