Why is my check engine light blinking Jeep Wrangler?
If the check engine light in your Jeep Wrangler starts flashing, that means that the problem needs immediate attention and your Jeep should be brought in hastily. This blinking light usually indicates a severe engine misfire allowing unburned fuel to be dumped into the exhaust system.
What does the Check Engine light mean on a Jeep Wrangler?
What Does the Check Engine Light Mean on A Jeep Wrangler? When your Jeep throws up a CHECK ENGINE light it means something is amiss and it has detected some mechanical problem with a component or an electrical signal error in the Jeeps system.
How does the trouble code work on a Jeep Wrangler?
The on-board reporting will communicate trouble codes to you through the check engine light in a series of flashes; similar to Morse Code. The key trick: With the ignition OFF, turn the key to ON (do not start the jeep), OFF, ON, OFF, ON (Complete this sequence in under 5 seconds).
What is the engine code for a Jeep YJ?
Jeep check engine codes for the YJ, XJ and other OBD1 jeeps. Jeep check engine codes for the Jeep Wrangler YJ and the XJ Cherokee. These codes and video may work with other OBD1 Jeeps. When Chrysler / Jeep came up with this idea for getting the engine codes, it was a very smart move.
What is the code for the Check Engine light?
FLASH FLASH followed by a <LONG PAUSE>, followed by the next code. Code 55 signals the end of stored OBD codes. You can repeat the key sequence as many times as needed if you were unsure of a code. *= Check Engine light will not illuminate at all times if this Trouble Code it present.
What Does the Check Engine Light Mean on A Jeep Wrangler? When your Jeep throws up a CHECK ENGINE light it means something is amiss and it has detected some mechanical problem with a component or an electrical signal error in the Jeeps system.
Are there engine codes for the Jeep Wrangler YJ?
Jeep check engine codes for the Jeep Wrangler YJ and the XJ Cherokee. These codes and video may work with other OBD1 Jeeps. When Chrysler / Jeep came up with this idea for getting the engine codes, it was a very smart move. This generation of Wranglers and Cherokees had the most simple diagnostics of any other.
Where can I find the DTC code on my Jeep Wrangler?
This is quite a comprehensive list, so to easily search for your Jeep Wrangler check engine light code, check out these keyboard shortcuts. If you have a Windows Machine: Use Ctrl + F (Control + F) to type in your Wrangler DTC code and find it in the table.
Why do I get a check engine code on my Jeep?
27*: One of the Injectors output drivers does not respond properly to control signal. 33*: Air conditioning clutch relay circuit open or shorted. If your Jeep doesn’t have AC you will always get this code. Will not trigger a “Check engine light”. 34*: Speed control vacuum or vent solenoid circuits open or shorted.