Can a strut bolt be removed from a jeep?
His jeep has 120k+ on it and that bolt was NOT coming out no matter how much we soaked it with PB Blast, 4ft breaker bar, hit it with air tools and heat from an acetylene torch….. it just was not enough! I guess being an ’06 with 120k didn’t help.
How to remove strut bolts from lower control arm?
Then feed the upper half of the strut assembly into the wheel well and line up the 4 bolts up top under the hood (we installed all 4 nuts up top to help keep the weight off the strut assembly, do NOT fully tighten) Next line up the clevis bracket and the bottom of the strut the best you can.
How to repair a threaded hole in a Jeep Grand Cherokee?
THREADED HOLE REPAIR DESCRIPTION THREADED HOLE REPAIR Most stripped threaded holes can be repaired using a Helicoilா. Follow the vehicle or Helicoilா recommendations for application and repair procedures.
What can you do with a Jeep Grand Cherokee?
The Jeep Grand Cherokee is able to carry the whole family and all the gear necessary for a camping trip in the Rockies, or a trip to the urban jungle with the greatest of ease. Boasting superior off-road abilities coupled with fabulous on-road maneuvering the Jeep Grand Cherokee is a unique vehicle well suited to any lifestyle.
His jeep has 120k+ on it and that bolt was NOT coming out no matter how much we soaked it with PB Blast, 4ft breaker bar, hit it with air tools and heat from an acetylene torch….. it just was not enough! I guess being an ’06 with 120k didn’t help.
Then feed the upper half of the strut assembly into the wheel well and line up the 4 bolts up top under the hood (we installed all 4 nuts up top to help keep the weight off the strut assembly, do NOT fully tighten) Next line up the clevis bracket and the bottom of the strut the best you can.
How do you remove a transmission from a jeep?
Remove the bolts holding the transmission to the transmission crossmember. Remove the bolts on each end of the transmission crossmember to drop the transmission. TIP- Be careful as the transmission will lean way back because it is only supported now by the engine mounts!