How big of a plug do I need for a steering column?
Wiring your Column This IDIDIT steering column uses a standard 3 7/8-inch male connect. However, some GM columns use a 4 ¼-inch male connector. Connectors do not interchange and must be used in pairs. A mate to the 3 7/8 inch plug is available through IDIDIT. If you need to change this connector for any reason the following schematic will be …
What are the wires in the steering column?
not present Letter W Wire Color F Function G G B Black H Horn Relay H H L Light Blue L Left Front Turn Signal J J B Blue R Right Front Turn Signal K K B Brown H Hazard Power (+12V) L
Where is the turn signal on a steering column?
Turn Signal Lever: The signal lever is the lever closest to the top of the column. With the steering wheel and adaptor removed, look down from the top of the column and you’ll see where a single screw holds the signal lever in place. Insert the new le- ver using the provided screw into round hole (not D shaped hole).
Where is the Horn wire on an Ididit steering column?
The center lug on the button should connect to a horn wire, which is provided by ididit with your steering column. This horn wire will slide into the horn cam (white plastic tube sticking up on the top of the column). If there is a second wire off to the side it is probably a ground wire (check with the horn button manufacturer to be sure).
What is the turn signal switch on a steering column?
Steering Column Wiring Diagrams Steering Column Wire Harness – Turn Signal Switch The multicolored wire harness on your Flaming River Industries steering column is for the turn signal switch pre-installed on the column. This document will provide a wiring diagram and a brief overview on how the turn signal switch functions.
What kind of plug does flaming river steering column use?
Flaming River. The Flaming River tilt steering column comes complete with stainless steel dress- up kit which Connect 4 1/4″ GM male plug to your vehicle wiring harness. This will activate connector. The standard GM wiring diagram for this plug is: Letter.
Wiring your Column This IDIDIT steering column uses a standard 3 7/8-inch male connect. However, some GM columns use a 4 ¼-inch male connector. Connectors do not interchange and must be used in pairs. A mate to the 3 7/8 inch plug is available through IDIDIT. If you need to change this connector for any reason the following schematic will be