Does a 2004 Jeep Liberty have a timing belt or chain?
Does A Jeep Liberty Have A Timing Belt (Cambelt) Or A Chain?
| Jeep Liberty | ||
|---|---|---|
| Model Year | Engine | Belt / Chain |
| 2002, 2003, 2004, 2005, 2006, 2007 (KJ) | 2.4 L PowerTech I4 (petrol) | timing belt |
| 2.5 L VM Motori R 425 I4 (turbo diesel) | timing belt | |
| 2.8 L VM Motori R 428 I4 (turbo diesel) | timing belt |
When to replace timing belt on Jeep Wrangler?
However, valve-to-valve interference can occur if the camshafts are rotated independently. Recommended timing belt replacement for the PowerTech 2.4L engine used in the Jeep Liberty/Wrangler is 120,000 miles.
How to replace timing belt on 2.4L PowerTech engine?
The following steps provide information on removal and replacement of the 2.4L I4 timing belt. 1. Remove the air cleaner upper cover, housing and clean air tube. 2. Raise the vehicle on a hoist. 3. Remove the accessory drive belts. 4. Remove the crankshaft vibration dampener.
What kind of wrench do I need to change timing belt?
Install a 6 mm Allen wrench into the belt tensioner. Before rotating the tensioner, insert the long end of a 1/8” or 3 mm Allen wrench into the pinhole on the front of the tensioner. See Figure 2. While rotating the tensioner clockwise, push in lightly on the tool until it slides into the locking hole.
What kind of engine does a Jeep Liberty have?
In its short life, the engine was available in the 2002-’06 Jeep Liberty (first generation), as well as the 2004-’06 Jeep Wrangler, but was discontinued when Jeep introduced the Compass and Patriot small crossovers. The 2.4L PowerTech is a double overhead camshaft with hydraulic lifters and four valves per cylinder design.
Where do you put the timing belt on a jeep?
Install the timing belt. Starting at the crankshaft, go around the water pump sprocket, idler pulley and camshaft sprockets and then around the tensioner. 4. Move the exhaust camshaft sprocket counterclockwise to align the marks and to take up belt slack.
The following steps provide information on removal and replacement of the 2.4L I4 timing belt. 1. Remove the air cleaner upper cover, housing and clean air tube. 2. Raise the vehicle on a hoist. 3. Remove the accessory drive belts. 4. Remove the crankshaft vibration dampener.
Install a 6 mm Allen wrench into the belt tensioner. Before rotating the tensioner, insert the long end of a 1/8” or 3 mm Allen wrench into the pinhole on the front of the tensioner. See Figure 2. While rotating the tensioner clockwise, push in lightly on the tool until it slides into the locking hole.
In its short life, the engine was available in the 2002-’06 Jeep Liberty (first generation), as well as the 2004-’06 Jeep Wrangler, but was discontinued when Jeep introduced the Compass and Patriot small crossovers. The 2.4L PowerTech is a double overhead camshaft with hydraulic lifters and four valves per cylinder design.