How do you change transmission filter in Jeep Wrangler?
1. Remove the transmission skid plate. 2. Remove all the bolts around the transmission pan and drop the pan, trying not to get ATF everywhere 3. Replace the transmission filter with a new one 4. Bolt the pan back on 5. Fill the transmission back up with ATF So, why change the ATF in your Wrangler?
When to change transmission fluid on 2005 Jeep Wrangler?
My 2005 Jeep Wrangler has about 66,000 miles on it at the time of this writing, far past the recommended time to change the automatic transmission fluid and filter. The 4-Speed 42RLE automatic transmission that came on my model year is not known as a very reliable transmission, since it’s prone to early failures.
How to change automatic transmission on JK Wrangler?
1. Park your Jeep JK Wrangler on level ground and remove the 3 bolts securing your automatic transmission skid plate to your Jeep JK Wrangler’s frame rails and cross member. You will need an 18mm socket for this job.
Can a transmission be removed from a wrangler?
Sometimes when the transmission breaks it will need to be entirely removed from the vehicle to be properly repaired. You can do the job on your own, but it will take at least a few hours.
1. Remove the transmission skid plate. 2. Remove all the bolts around the transmission pan and drop the pan, trying not to get ATF everywhere 3. Replace the transmission filter with a new one 4. Bolt the pan back on 5. Fill the transmission back up with ATF So, why change the ATF in your Wrangler?
My 2005 Jeep Wrangler has about 66,000 miles on it at the time of this writing, far past the recommended time to change the automatic transmission fluid and filter. The 4-Speed 42RLE automatic transmission that came on my model year is not known as a very reliable transmission, since it’s prone to early failures.
1. Park your Jeep JK Wrangler on level ground and remove the 3 bolts securing your automatic transmission skid plate to your Jeep JK Wrangler’s frame rails and cross member. You will need an 18mm socket for this job.
Where to remove transmission pan in Jeep Wrangler?
Removing the Jeep transmission pan Carefully position your oil pan under the Jeep and remove two of four remaining bolts on one side of the Jeep. Chances are that the transmission pan will simply stay put – held on by the gasket, but be ready for a torrent of transmission fluid.