When should I change my Jeep JK shocks?
According to some research, you should change the shocks of your jeep at 50,000 to 100,000 miles. There’s an estimation of more than 88 million oscillations by your shocks at 50 000 miles. Also, you should go for replacement when there is a decrease in your jeep’s steering and braking ability.
How long do Jeep JK shocks last?
Typical replacement for shocks on most vehicles is between 30,000 and 45,000 miles.
How long should shocks last on a Jeep Wrangler?
Rough driving habits may shorten the life of these parts. Struts and shocks may need to be replaced anywhere between 50k and 100k miles. If at any time the struts or shocks are leaking, broken, or damaged, they should be replaced immediately.
Do you need flashcal for a JK Wrangler?
Loaded with the features you need, Flashcal for Jeep is the ideal tool to give you the options you need on the road or off the beaten path. Don’t drive without knowing your true speed, take advantage of TPMS on/off, and explore all that Flashcal for Jeep has to offer for your JK Wrangler®. Wrangler® JKs rarely stay stock for long.
What is the Procal module for a JK Wrangler?
AEV’s ProCal Module for the 2007-18 JK Wrangler is a hand-held powerhouse! This essential tool provides JK owners an easy, low-cost way to make a variety of useful changes not offered by the dealer or any other re-programmer. Topping the list is the ability to correct the speedometer and gear ratio when larger tires are installed.
Why do you need to regear your Jeep Wrangler?
This means that with a 30 inch tire you need to apply 30 times more force to the axle in order to turn the wheel. By regearing to a shorter gear, you will increase the amount of force that is being sent to the axle, this allows your Jeep to move the tires with less of a strain on the engine.
Do you need Superchips flashcal for Jeep Wrangler?
Jeep Wrangler® JKs are some of the most highly modified vehicles on the road today. Any time you change tires, wheels, or gears you need a speedometer correction. Superchips Flashcal for Jeep® is the easiest tire and gear calibration tool on the market today.
Loaded with the features you need, Flashcal for Jeep is the ideal tool to give you the options you need on the road or off the beaten path. Don’t drive without knowing your true speed, take advantage of TPMS on/off, and explore all that Flashcal for Jeep has to offer for your JK Wrangler®. Wrangler® JKs rarely stay stock for long.
How to do a reset on a Jeep Wrangler?
1 Disconnect the POSITIVE battery Terminal and touch it to ground for 30 seconds. (This is to discharge the PCM capacitors, which maintain the Adaptive Memory. 2 Reconnect the Battery Cable 3 Turn Ignition Switch to the “ON” position but DO NOT start the engine 4 Turn Headlight “ON” 5 Turn Headlights “OFF” 6 Turn Ignition Key “OFF”
This means that with a 30 inch tire you need to apply 30 times more force to the axle in order to turn the wheel. By regearing to a shorter gear, you will increase the amount of force that is being sent to the axle, this allows your Jeep to move the tires with less of a strain on the engine.
How to erase adaptive memory on Jeep Wrangler?
Turn Ignition Key “OFF” The PCM Adaptive memory has now been flashed, or erased from the PCM. 1. Disconnect the POSITIVE battery Terminal and touch it to ground for 30 seconds. (This is to discharge the PCM capacitors, which maintain the Adaptive Memory.